Featured Solutions

1. 0.66 – 0.72 GHz High Linearity Power Amplifier: GRF5506 11/24/2020

   The GRF5506 from Guerrilla RF is a high gain, two-stage InGaP HBT power amplifier ideally designed for use in transmitter applications that typically do not employ digital predistortion correction schemes. The device delivers excellent P1dB, ACLR, and IM3 performance over the 660 to 720 MHz frequency range.

2. NuPower Xtender™ L-Band And S-Band Bidirectional Amplifier: 12B04A-D27 11/23/2020

   The NuPower Xtender™ 12B04A-D27 is a bidirectional amplifier module featuring a small, broadband, high-performance RF amplifier that generates 20 watts of RF power across the L- and S-band frequencies of 1.0 to 2.5 GHz. It is ideal for use in extending the communication range of half-duplex L- or S-band transceivers running constant-envelope or near-constant-envelope waveforms.

3. 0.5-18 GHz 50 Ohm Directional Coupler: 50C-070-XX 11/23/2020

   The 50C-070-XX from JFW is a wideband directional coupler designed to operate from 500 MHz to 18 GHz and is rated for 50 Watts of RF input power.

4. Passive Loop Antenna: SAS-563P 11/23/2020

   The SAS-563P is a 12” passive shielded loop antenna as an excellent solution for shielding effectiveness testing. The electrostatic shielded loop antenna is typically used for shielding effectiveness testing per IEEE 299, MIL-STD 285, and NSA 65-6 as well as many other test standards. This passive loop antenna is shielded against the electric component by enclosing the conducting loop within an all-metal shield.

5. AR Predefined Systems 11/23/2020

   Producing a system that excels in performance and reliability is easy when you have System Design and Applications Engineers with years of experience, Customer Service with global reach, and products that are known for performance and quality. AR has this very organization and product offerings. AR is here for you at each step to ensure that the system design, integration, and support of your EMC or RF system complies with your goals.

6. 5.9 GHz 802.11p DSRC High-Power Front-End Module: SKYA21043 11/20/2020

   The SKYA21043 is a highly integrated, 5 GHz front-end module (FEM) designed specifically for 802.11p V2V and V2X applications. The module incorporates a 5 GHz single-pole, double-throw (SPDT) transmit/receive (T/R) switch, a 5 GHz high-gain low-noise amplifier (LNA) with bypass, and a 5 GHz power amplifier (PA) intended for high-power 802.11p applications and systems.

7. Mid- And High-Band Front-End Module For 3G, 4G, And 5G Applications: SKY5®-8085-11 11/20/2020

   The SKY58085-11 is a mid- and high-band front end module (FEM) designed to support 3G/4G/5G mobile devices and operate efficiently in 3G/4G/5G modes. This model meets stringent 5G NR and LTE advanced requirements where wider bandwidth and carrier aggregation are utilized for high data rates.

8. 0.1 – 6.0 GHz Ultra Low-Noise LNA: QPL9058 11/19/2020

   Qorvo offers the QPL9058 high-linearity, ultra-low noise amplifier designed for use in many applications including 5G m-MIMO, repeaters/DAS, LTE, TDD/FDD systems, and other general-purpose wireless applications. At 3.6 GHz, the amplifier typically provides 18 dB gain, +36 dBm OIP3 at a 55 mA bias setting, and 0.6 dB noise figure. The LNA can be biased from a single positive supply ranging from 3.3 to 5 volts.

9. 10 - 13 GHz Dual Channel Low Noise Amplifier: QPL2210 11/18/2020

   Qorvo delivers the QPL2210 dual channel high-performance, low noise amplifier fabricated on Qorvo’s production 90 nm pHEMT process. Covering 10 – 13 GHz, the QPL2210 provides 16 dB small signal gain and 1.2 dB noise figure. With a compact die size of 3 x 3 mm, the amplifier can deliver 5 dBm of saturated power with a high linearity of 8 dBm of output TOI at Pin = - 25 dBm/tone.

10. 50 MHz - 4 GHz Low Noise Amplifier: QPL7442 11/17/2020

    Qorvo delivers the QPL7442 low noise, high gain, wide bandwidth MMIC pHEMT single ended RF amplifier IC featuring 20 dB of flat gain. This IC is designed to support CPE front end, cable, satellite and terrestrial TV, home gateways, and cable modems from 50 to 4000 MHz using a single 5 V supply.