current-probes-products

1. Mixers 8/8/2005
   Mixers
2. Plastic-Encased Oscillator 2/15/2000
   The JITO-2P is a plastic-encased oscillator designed as a drop-in replacement for the Epson SG615 fixed-frequency oscillator or the Epson SG8002JA programmable oscillator
3. Low Noise Amplifier (0.01 GHz To 10 GHz): HMC8411 4/5/2021

   Analog Devices' HMC8411 is a LNA that supports defense and aerospace applications. Housed in a RoHS-compliant, 2 mm × 2 mm, 6-lead LFCSP, this product provides a typical gain of 15.5 dB, a 1.7 dB typical noise figure, and a typical output third-order intercept (OIP3) of 34 dBm, requiring only 55 mA from a 5 V supply voltage. 

4. 50 Watt Attenuator With 4.3/10 RF Connectors: 50FH-XXX-50-3 8/10/2020

   The 50FH-XXX-50-3 from JFW is a 50 Ohm coaxial fixed attenuator rated at 50 Watts maximum RF input power that operates DC-3000 MHz. The connector is available with dB values ranging from 1 dB to 50 dB, and the heatsink has mounting holes on both ends and on the bottom side. Mixed RF connectors, such as 4.3/10 male or N female, are made available.

5. Exodus AMP2071-2, 80 – 1000 MHz, 500W, 400W P1 9/5/2024

   The AMP2071-2 is a solid-state amplifier designed to deliver exceptional performance in demanding environments. Its compact rack-mounted design makes it ideal for both laboratory and field applications.

6. CHV2711-QJ - 3.5 GHz InGaP HBT 5W Linear Power Amplifier 7/5/2006
   The CHV2711 internally pre-matched power HBT device provides 9.5dB of gain, 2.5% EVM at 29.5 dBm output power for 802.16 OFDM signal with a peak to average power ratio of 9 dB. The device operates off a single supply voltage up to 12V and includes internal bias circuitry to enable exact setting of the quiescent current using an external Vcontrol...
7. Six-Channel Digital Pulse/Delay Generator: Model 525 5/14/2020

   BNC offers the Model 525 digital pulse generator designed with full feature functions in a compact 7.125” x 5.1” x 1.5” cost-effective package. The Model 525's interface is USB only, which eliminates the bulky front panel components and reduces the potential for mechanical problems.

8. SP3T RF Switch: F3 Series 7/11/2023

   The SP3T RF switch with SMA Female connectors is available in the momentary (normally open) configuration at 12 Vdc, 15 Vdc, 24 Vdc, or 28 Vdc. An additional option for TTL Logic allows for a 5 Vdc operation.

9. Front End Module: QPF4532 12/10/2021

   The Qorvo QPF4532 is an integrated front end module (FEM) designed for Wi-Fi 6 (802.11ax) systems. The compact form factor and integrated matching minimizes layout area in the application.

10. Ultra-Low Noise Bypass LNA: QPL9097 10/13/2017

    Qorvo offers the QPL9097 high-linearity, ultra-low noise gain block amplifier with integrated bypass mode functionality. This LNA is ideal for a wide range of applications including base station receivers, tower mount amplifiers, repeaters, FDD-LTE, TDD-LTE, WCDMA, and general purpose wireless systems.