RF Test And Measurement Resource Center

TEST & MEASUREMENT APPLICATION NOTES AND WHITE PAPERS

Testing For Coexistence In Crowded And Contested RF Environments
In this paper, we review some of the key research, development, test and evaluation (RDT&E) challenges that arise when developing and deploying systems that need to operate in congested and/or contested RF environments.
RF Amplifier Output Voltage, Current, Power, And Impedance Relationship
How much output voltage, current, and power can you expect from your amplifier? In rare cases, this can be answered by applying Ohm’s law, assuming that the net power or power delivered to the load is the rated power output of the amplifier. In most cases, practical issues such as VSWR and forward power concerns must be considered before applying Ohm’s law. This application note addresses this issue and discusses an approach to be used that applies actual test data when calculating output parameters.
Compact Solution For Network Analysis In The mmWave Range
The R&S^®ZNA vector network analyzer with integrated LO output and direct IF input options is a simple, cost-effective solution for 2-port and 4-port measurements using Rohde & Schwarz mmWave converters.
Certium VCS Test System For Aircraft Manufacturers
New aircraft need to have their radiocommunication systems tested with compact voice communication systems like CERTIUM VCS. This is cost-effective, space-saving, and scalable thanks to its IP-based infrastructure.
How To Configure Generic Devices In R&S Elektra
R&S ELEKTRA is able to communicate with many devices. Still, it is impossible to integrate drivers for all devices. Hence, R&S ELEKTRA offers the possibility to integrate any device by configuring a generic driver.

More Test & Measurement Application Notes and White Papers

TEST & MEASUREMENT SOLUTIONS

FlightHawk Aviation RF Cable And Antenna Analyzer Kit: FH-AV-KIT

Bird offers the FH-AV-KIT, a FlightHawk™ RF Aviation Test Kit designed for avionics testing and measurement applications. This kit includes a proven antenna and cable testing functionality of the FlightHawk handheld analyzer, all necessary adapters and cabling, and Bird’s aviation testing software that allows anyone on the maintenance team to test and verify all antenna systems in a fleet.

XFdtd Superposition For Advanced Phased Array Design

XF leverages the EM principle of superposition to quickly analyze port phase combinations with a single simulation.

Extended Frequency Spectrum Analyzer: EVO-RSA-6070A

The EVO-RSA-6070A is part of the EVO Series of extended frequency spectrum analyzers from Avcom designed for higher performance and agility in applications with continuously changing requirements. The included SDR-style technology analyzer includes a wide bandwidth receiver and employs FPGA, DSP, and high-performance processors.

26 GHz Sentinel Intelligent Signal Scanner Recording System: Talon® RTX 2684

Pentek offers the Talon® RTX 2684 as a 26 GHz sentinel intelligent signal scanner recording system. The system provides SIGINT engineers the ability to scan the RF spectrum from 1 GHz to 26 GHz for signals of interest and monitor or record bandwidths up to 500 MHz wide.

GORE® VNA Microwave/RF Test Assemblies

The series of GORE^® VNA microwave/RF test assemblies from W.L. Gore are designed to provide the most precise VNA measurements in laboratory conditions, setting the standard for vector network analyzers (VNAs) through 70 GHz. These test assemblies deliver the highest accuracy and greatest time intervals between recalibrations for many applications, including those with vector network analyzers, critical measurements, and laboratory testing.

Holzworth RF Synthesizers Multi-Channel Platform: HS9000 Series

Holzworth’s multi-channel RF synthesizer architecture is a complete success story. These compact, 1U high, 19in rack mountable chassis can be configured with up to 8 independently tunable channels. All integrated channels are 100% phase coherent. Holzworth has designed the multi-channel platform for integration of our HSM Series Single Channel Synthesizers to maximize channel-to-channel stability via a conductively cooled, fan-less enclosure.

MXO 5 Series Oscilloscope

The MXO 5 Series delivers breakthrough oscilloscope technology to speed up your understanding and testing of electronic systems.

Electrostatic Discharge (ESD) Testing Simulation

Electrostatic discharge testing is utilized worldwide by electronics manufacturers to determine the ESD susceptibility of their devices. It is extremely difficult to estimate the exact cost of ESD loss annually, but it can safely be stated that ESD requires the development and testing of many hardware prototypes and contributes to a high number of warranty claims and loss of consumer confidence if failure occurs in the hands of the customer. Given the high cost in time and materials associated with ESD hardware testing, the ability to simulate the ESD testing process in XFdtd is extremely valuable, allowing engineers to pinpoint locations susceptible to ESD damage and optimize ESD mitigation during the concept and design stage of product development.

More Test & Measurement Solutions