RF Test And Measurement Resource Center

TEST & MEASUREMENT APPLICATION NOTES AND WHITE PAPERS

How To Test USB Power Delivery Over Type-C
USB Type-C compliance test standards are more complex due to higher data transmission speeds and more power. Successful testing requires accurate and compliant test instruments, software, and fixtures.
Top 10 Considerations For Automotive EMC Chamber Design And Testing
This resource will help you avoid the most common mistakes and outlines the important things to consider to successfully develop or refine an automotive EMC chamber and test design.
Four Practical Applications Using An Electronic Load
This article presents four tips on how to test with electronic loads and illustrate the flexibility and usefulness of a DC electronic load.
Radiated Wireless Coexistence Testing
This application notegives the reader a clear idea of how to configure standardized test instruments from R&S in order to generate the wanted signal as well as unintended interference signals and conduct measurement to monitor device performance.
Reduce Risk With A Better Measurement Process
Measurement risk is the probability of making an incorrect decision. Many quality standards require calibration to reduce measurement risk. This white paper explores calibration, how it mitigates risk, as well as different calibration deliverables that can reduce testing costs.

More Test & Measurement Application Notes and White Papers

TEST & MEASUREMENT SOLUTIONS

Integrated Stabilized RF Source: dB-9003, dB-9005

The dB-9003 and dB-9005 from dB Control are custom-mounted Integrated Stabilized RF Sources (ISRFS) designed to operate in the I and Ka-band frequency range. Both products feature high accuracy and a wide temperature operating range. They can be controlled and set up with a digital port. The units are packaged in a custom configuration with conduction cooling.

TWT Amplifier: dB-3908

The dB-3908 TWT Amplifier (TWTA) is designed to use two wideband, periodic permanent magnet (PPM)-focused TWTs to amplify CW, AM, FM or pulse-modulated signals. The dB-3908 offers higher saturated output power and improved harmonic performance when compared to a single TWT approach.

Si894x Isolated Delta-Sigma Modulator For Current Measurement

The Si894x is a galvanically isolated delta-sigma modulator which outputs a digital signal proportional to the voltage level at the input.

Holzworth Phase Noise Measurement Analyzers

Holzworth Instrumentation was founded as a phase noise measurement company. Along the path to phase noise analysis solutions, our high performance building blocks were developed and sold in the form of RF Synthesizers, Phase Detectors, etc. The HA7401A is a Fixed Frequency Phase Noise Analyzer, and the HA7402A is a Phase Noise Measurement Engine.

FlightHawk Aviation RF Cable And Antenna Analyzer Kit: FH-AV-KIT

Bird offers the FH-AV-KIT, a FlightHawk™ RF Aviation Test Kit designed for avionics testing and measurement applications. This kit includes a proven antenna and cable testing functionality of the FlightHawk handheld analyzer, all necessary adapters and cabling, and Bird’s aviation testing software that allows anyone on the maintenance team to test and verify all antenna systems in a fleet.

TWT Amplifier: dB-3907

The dB-3907 TWT Amplifier (TWTA) is designed to use two wideband, periodic permanent magnet (PPM)-focused TWTs to amplify CW, AM, FM or pulse-modulated signals. The dB-3907 offers higher saturated output power and improved harmonic performance when compared to a single TWT approach.

Small Form Factor 8-Channel RF A/D & D/A Subsystem: Model 6350S

The Model 6350S is a small form factor 8-channel A/D & D/A subsystem designed for a variety of applications including high-bandwidth data streaming, waveform signal generators, multimode data acquisition, and other electronic warfare systems. Designed to be integrated into larger systems with minimal design effort, the 6350S delivers the performance and high-channel density of RFSoC in a small, convenient footprint.

1 – 6 GHz, 20 Watt Wideband Amplifier: MS010620

Microwave Systems offers the MS010620 multi-octave, high-power GaN amplifier designed to operate from 1 to 6 GHz. It is ideally suited for use in communications systems, radar systems, test instrumentation, broadband RF telemetry, point to point radio, and fiber optics applications.

More Test & Measurement Solutions