Switches Products

  1. 0.1 To 6.0 GHz SPDT Switch: SKYA21003
    1/4/2017

    The SKYA21003 from Skyworks is a silicon-on-insulator (SOI) single-pole, double-throw (SPDT) switch designed for use in a wide variety of automotive applications including infotainment, telematics, remote keyless entry, automated toll systems, automotive smart home control systems, and GPS/navigation.

  2. 0.6 to 6.0 GHz 4XSPST Shunt MIPI® Antenna Tuning Switch: SKY5™-9256-701LF
    8/7/2018

    Skyworks new SKY5™-9256-701LF is a 4X single-pole, single-throw (4XSPST) switch is designed for antenna tuning applications requiring ultra-low ON resistance and low OFF capacitance in the 0.6 to 6.0 GHz frequency range. The switching is controlled by an integrated Mobile Industry Processor Interface (MIPI) controller.

  3. RF Switch Matrices
    4/3/2018

    For applications involving the test and measurement of multiple RF components, Teledyne Coax, a business unit of Teledyne Microwave Solutions, offers Custom Switch Matrix solutions to integrate multiple switches, along with additional components including filters, mixers, and attenuators, as required.

  4. High Power RF Pin Diode Switches
    1/13/2017

    Corry Micronics' new RF pin diode switches operate in the 100 MHz to 12 GHz range. The CMSW-SPDTR-1G-5K is a single-pole double-throw (SPDT) hermetically sealed reflective switch, while the CMTRSW-1G1R1G-2K5 is a high power transmit/receive (T/R) switch designed to be used in IFF applications.

  5. 700 - 2700 MHz General Purpose DPDT Transfer Switch: QPC6222
    1/27/2017

    Qorvo offers the QPC6222 double-pole double-throw (DPDT) transfer switch designed for general purpose switching applications where RF port transfer control is needed, including data cards, IoT, telemetry, automotive, cellular modems, USB devices, and multi-mode WCDMA and LTE. Some key features for this switch are its low insertion loss, high linearity performance, high-port-to-port isolation, and power handling up to +35 dBm.

  6. 0.9 To 6.0 GHz SPDT Switch: SKYA21038
    10/23/2018

    The SKYA21038 from Skyworks is a single-pole, double-throw (SPDT) switch designed for use in a wide variety of automotive infotainment applications, WLAN repeaters, ISM band radios, low-power transmit/received systems, and IoT M2M modules requiring enhanced robustness.

  7. 0.15 – 2.8 GHz, 50 W GaN SPDT Switch: QPC1005
    4/3/2018

    Qorvo introduces the QPC1005 single-pole, double-throw (SPDT) switch operating within the 0.15 to 2.8 GHz frequency range for radar, land mobile radio, military communication, electronic warfare, test instrumentation, and other general purpose applications. The switch typically supports 50 W input power handling at control voltages of 0/−40 V for both CW and pulsed RF operations.

  8. 5 MHz To 21 GHz High Isolation Switches
    1/26/2017

    Teledyne Microwave Solutions (TMS) offers High Isolation Switches with low insertion loss, high 1dB compression point, high third order I.P., and fast switching speed. TMS switches are designed for a wide variety of communications applications.

  9. Advanced SPDT Switch For WLAN Applications: SKY13592-689LF
    11/21/2016

    The SKY13592-689LF is a single-pole, double throw (SPDT) switch that operates in the 0.1 to 6.0 GHz frequency range and is ideal for WLAN applications, ISM band radios, low power transmit receive systems, smartphones, and connectivity models. This device uses advanced switching technologies to maintain low insertion loss and high isolation for all switching paths.