Qorvo introduces the QPC1005 single-pole, double-throw (SPDT) switch operating within the 0.15 to 2.8 GHz frequency range for radar, land mobile radio, military communication, electronic warfare, test instrumentation, and other general purpose applications. The switch typically supports 50 W input power handling at control voltages of 0/−40 V for both CW and pulsed RF operations.
The JFW Model 50MS-367 is a 4 X 4 blocking matrix switch designed to operate in the DC-40 GHz frequency range, and is ideally suited for SATCOM and wireless 5G signal routing applications.
Corry Micronics' new RF pin diode switches operate in the 100 MHz to 12 GHz range. The CMSW-SPDTR-1G-5K is a single-pole double-throw (SPDT) hermetically sealed reflective switch, while the CMTRSW-1G1R1G-2K5 is a high power transmit/receive (T/R) switch designed to be used in IFF applications.
Corry Micronics offers the DCR-8E eight port reflected switch designed to be remotely controlled via Ethernet to a laptop or PC. This standard broadband switch has an operating frequency of 20 MHz to 18 GHz with an insertion loss of only 4 dB, and offers excellent port-to-port isolation of a minimum of 80 dB. The DCR-8E can be custom designed for customer specific bandwidths and switching port applications.
The PE42525 is a reflective single-pole double-throw (SPDT) switch die with HaRP™ technology designed to support a wide frequency range from 9 kHz to 60 GHz. This wideband flip-chip switch delivers low 1.9 dB insertion loss, 38 dB isolation, fast switching times, and high isolation performance. It is deal for many applications including test and measurement, microwave back-haul, radar, and military communications.
Corry Micronics offers the CMISFB-80180T4 Custom EMI Filters designed for electrical, mechanical, and environmental testing to various military specifications, including MIL-PRF 15733 and MIL-PRF-28861. Features include low insertion loss, fast switching speeds, custom mechanical specifications, and broadband operation from DC to 40 GHz.
The SKYA21003 from Skyworks is a silicon-on-insulator (SOI) single-pole, double-throw (SPDT) switch designed for use in a wide variety of automotive applications including infotainment, telematics, remote keyless entry, automated toll systems, automotive smart home control systems, and GPS/navigation.
Qorvo offers the QPC6222 double-pole double-throw (DPDT) transfer switch designed for general purpose switching applications where RF port transfer control is needed, including data cards, IoT, telemetry, automotive, cellular modems, USB devices, and multi-mode WCDMA and LTE. Some key features for this switch are its low insertion loss, high linearity performance, high-port-to-port isolation, and power handling up to +35 dBm.
The new CMSW-SPDTR-1G-5K from Corry Micronics is a single-pole double-throw (SPDT) hermetically sealed reflective switch designed for operation in applications from 1 GHz to 1.1 GHz at 100 W average input power. It features peak power handling at 5kW for a 17 uS/2% duty cycle pulse.
Aethercomm’s SSHPS 1.00-2.50-200 is a high power RF switch designed for communication and electronic warfare (EW) applications where high power, low loss, and excellent isolation are required. This switch operates from +28V dc supply with 750 mA maximum current draw, and the peak power out is 1.0 kW maximum.
|
|
|
|
|
|
|
|
|