Switches Products

  1. 75 Ohm RF Switch Assembly: 75SA-081
    11/30/2018

    JFW’s 75SA-081 is a 75 Ohm RF switch system in a low profile benchtop enclosure type for applications in the DC-2150 MHz range. It has an RF input power of 0.5 Watts, has 2 individually controlled 1P16T normally open self-terminating electro-mechanical RF switches in a 19 inch rack mount @ 4RU high.

  2. 0.6 to 6.0 GHz 4XSPST Shunt MIPI® Antenna Tuning Switch: SKY5™-9256-701LF
    8/7/2018

    Skyworks new SKY5™-9256-701LF is a 4X single-pole, single-throw (4XSPST) switch is designed for antenna tuning applications requiring ultra-low ON resistance and low OFF capacitance in the 0.6 to 6.0 GHz frequency range. The switching is controlled by an integrated Mobile Industry Processor Interface (MIPI) controller.

  3. 5 MHz To 21 GHz High Isolation Switches
    1/26/2017

    Teledyne Microwave Solutions (TMS) offers High Isolation Switches with low insertion loss, high 1dB compression point, high third order I.P., and fast switching speed. TMS switches are designed for a wide variety of communications applications.

  4. Ethernet Controlled Remote Broadband Switch: DCR-8E
    7/27/2018

    Corry Micronics offers the DCR-8E eight port reflected switch designed to be remotely controlled via Ethernet to a laptop or PC. This standard broadband switch has an operating frequency of 20 MHz to 18 GHz with an insertion loss of only 4 dB, and offers excellent port-to-port isolation of a minimum of 80 dB. The DCR-8E can be custom designed for customer specific bandwidths and switching port applications.

  5. 0.15 To 2.8 GHz High Power GaN SP3T Switch
    5/3/2017

    Qorvo’s QPC1006 is a high power single-pole triple-throw (SP3T) switch optimized for test instrumentation, electronic warfare, communications, radar, and other general purpose applications. The switch is capable of operation within the 0.15 to 2.8 GHz frequency range.

  6. 75 Ohm Solid State RF Switch: 75S-371
    11/30/2018

    JFW’s 75S-371 is a 75 Ohm solid state RF switch for applications in the 5-2150 MHz range. It has an RF input power of +10 dBm at 5 MHz and +20 dBm above 100 MHz, has an isolation of 60 dB, and 1P8T failsafe self-terminating configuration.

  7. 75 Ohm Fixed Attenuator: Model 75FP-XXX-3G
    11/30/2018

    JFW’s Model 75FP-XXX-3G is a 75 Ohm coaxial fixed attenuator rated at 0.5 Watts maximum RF input power that operates DC-3 GHz. Available dB values from 1 dB to 30 dB. The RF connectors can be BNC male/female, N male/female or F male/female.

  8. Absorptive And Reflective PIN Diode Switches
    6/22/2017

    Ducommun delivers a range of absorptive and reflective PIN diode switches for an array of applications including test instrumentation, telecommunication, radar front, WiGig application development, and wireless 5G technology. These switches feature low insertion loss, high isolation, and a fast nanosecond switching times in a complete solid state solution.

  9. 700 - 2700 MHz General Purpose DPDT Transfer Switch: QPC6222
    1/27/2017

    Qorvo offers the QPC6222 double-pole double-throw (DPDT) transfer switch designed for general purpose switching applications where RF port transfer control is needed, including data cards, IoT, telemetry, automotive, cellular modems, USB devices, and multi-mode WCDMA and LTE. Some key features for this switch are its low insertion loss, high linearity performance, high-port-to-port isolation, and power handling up to +35 dBm.

  10. High Power SPDT Reflective Switch For 1 GHz – 1.1 GHz Applications: CMSW-SPDTR-1G-5K
    1/17/2018

    The new CMSW-SPDTR-1G-5K from Corry Micronics is a single-pole double-throw (SPDT) hermetically sealed reflective switch designed for operation in applications from 1 GHz to 1.1 GHz at 100 W average input power. It features peak power handling at 5kW for a 17 uS/2% duty cycle pulse.