RF Switches
-
Assembly With 10 RF Switches: 75SA-030
8/17/2022
The 75SA-030 is a 10-switch assembly from JFW Industries.
-
Non-Blocking Matrix Switch: 50MS-426
4/14/2022
JFW's 50MS-426 is a 50 Ohm non-blocking matrix switch operating 350-6000MHz. The switch can be remotely controlled via Ethernet or RS-232 connection, and the IP settings can be manually set via the front panel display.
-
Commercial 8GHz Solid State RF Switches
3/7/2022
JFW has added a line of 50 Ohm solid-state RF switches that operate 20MHz to 8GHz. These commercially rated models are ideal for constructing low cost RF testbeds for automated testing. The switches are controlled with TTL control lines. The switches can hot switch up to +26dBm with typical isolation of 55dB at 8GHz.
-
DC-18GHz, 8 x 8 Blocking Matrix Switch: 50MS-404
7/9/2021
Model 50MS-404 is an 8X8 blocking matrix switch. All unused ports are absorptive (i.e. self-terminating into 50 Ohm). It is available with 50 Ohm N or SMA female connectors.
-
20 – 5,000 MHz 1P8T RF Switch For Economical Automated RF Testing: 50S-2133 SMA
11/13/2020
The 50S-2133 SMA from JFW is a solid-state, self-terminating 1P8T RF switch designed for economical automated RF testing applications in the 20 – 5,000 MHz frequency range.
-
3 – 1000 MHz 75 Ohm Matrix Switch With 2 x 8 Blocking: 75MS-029
7/10/2020
JFW offers the 75MS-029 75 Ohm blocking matrix switch that operates from 3 – 1000 MHz. This switch can be used to fan-out connections from a 2-port 75 Ohm network analyzer to allow for automated multi-port 75 Ohm testing.
-
75 Ohm Electro-Mechanical RF Switches
4/17/2020
JFW offers a full line of 75 Ohm electro-mechanical RF switches. They are idealfor cable TV and VSAT testing applications. All models cover a frequency range of DC-2150 MHz, are self-terminating, and come standard with F female connectors (75 Ohm BNC and N also available).
-
RF Switch Assembly: 75SA-081
11/30/2018
JFW’s 75SA-081 is a 75 Ohm RF switch system in a low profile benchtop enclosure type for applications in the DC-2150 MHz range. It has an RF input power of 0.5 Watts, has 2 individually controlled 1P16T normally open self-terminating electro-mechanical RF switches in a 19 inch rack mount @ 4RU high.
-
75 Ohm Solid State RF Switch: 75S-371
11/30/2018
JFW’s 75S-371 is a 75 Ohm solid state RF switch for applications in the 5-2150 MHz range. It has an RF input power of +10 dBm at 5 MHz and +20 dBm above 100 MHz, has an isolation of 60 dB, and 1P8T failsafe self-terminating configuration.
-
Electro-Mechanical Coaxial Switch: 50S-1770+XX-TTL
11/30/2018
JFW’s Model 50S-1770+XX-TTL is a 50 Ohm electro-mechanical 1P2T RF switch designed for operating in applications from DC - 40 GHz with 2.9 mm female RF connectors. This RF switch is latching type and absorptive (i.e. self-terminating), and the latching design means there will always be one RF path set.