Products and Services

  1. Current Probe Fixture: CPF-632 2/19/2025

    This CPF-632 Current Probe Fixture calibrates small-diameter probes (1.25" ID) for 20 Hz–500 MHz measurements, using a trough transmission line to enable accurate current measurement via RF voltmeter.

  2. Current Probes 6/22/2016

    A.H. Systems offers Current Probe devices designed to be used in generating and measuring high levels of RF current, and in many industrial and scientific applications. They can be used to measure conducted currents without making direct contact with the source conductor or metallic surface.

  3. Current Probe Fixtures 12/7/2008

    The A.H. Systems' line of Current Probe Calibration Fixtures are a great way to keep your broadband Current Probes, and Injection Current Probes calibrated and up to date. Their rugged design ensures long life, and faultless operation over the wide calibration frequency range of 10 kHz to 1000 MHz.

  4. RealProbe VEC-102 10/6/2004
    The RealProbe VEC-102 is an in-circuit, high-accuracy RF probe covering the 10-7000 MHz frequency range...
  5. Connector Inspection Microscope Kit: Video Inspection Probe Lite 4/28/2011

    The Video Inspection Probe Lite (VIP Lite) application for Anritsu field testing platforms gives operators a safe, easy way to analyze and document connector conditions. With today’s high data rate, high definition services, connector quality and inspection have never been so important. Research reveals that up to 75% of all optical network failures are attributed to poor connector quality - reduce your installation time and ensure your network is reaching its full potential.

  6. EM Probe Systems 6/6/2012

    Schmid and Partner Engineering’s line of Time Domain Sensor (TDS) probes are used to detect EMC/EMI, MRI, and antenna measurements.

  7. Current Probe Fixture: CPF-633 2/19/2025

    The CPF-633 Current Probe Fixture calibrates large-diameter probes (2.6" ID) for 20 Hz–500 MHz measurements, using a trough transmission line to enable accurate current measurement via RF voltmeter.

  8. Isotropic "E" Field Probe, 100 kHz to 3 GHz, 0.4 to 660 V/m 9/30/2005

    The FP7003 is a broadband isotropic electric field measurement instrument for use in EMC and EMI applications

  9. Coaxial Test Probe Solutions For Testing And Developing Circuits 6/27/2016

    Pasternack offers a new line of semi-rigid coaxial test probes designed specifically for assisting in testing microwave circuits. These probes can be used to make sampling measurements without creating a separate subassembly circuit board or adding a connector to the circuit layout. Available in three different diameters of semi-rigid coax, and 3, 6, 9, or 12 inch lengths, these cable assemblies can fit a variety of trace widths and applications.

  10. EMSense 40 7/27/2022

    ETS-Lindgren's laser-powered EMSense 40 Electric Field Probe embodies the latest innovations in isotropic sensor design, low noise, and miniaturized electronics. Designed to be single range reading, the EMSense 40 can read data continuously over the entire dynamic range.