monopole-dipole-products
-
TV-2 Tuned Dipole Antenna - 325 MHz - 1000 MHz
11/22/2008
The TV-2 is a tuned dipole antenna from A.H. Systems that operates within the 325 MHz to 1000 MHz frequency range.
-
FCC-3 Tuned Dipole Antenna - 170 MHz - 340 MHz
11/22/2008
The FCC- is a tuned dipole antenna operating within the 170 MHz - 340 MHz frequency range.
-
Sleeve Dipole Antennas
11/22/2008
These end-fed sleeve dipole antennas are truly omni-directional having excellent symmetry with low VSWR. These dipoles are an excellent solution as a reference for antenna gain measurements, wireless testing and chamber reflectivity evaluation. The end-fed connection point allows better performance in symmetry, ideal for the requirement of a truly omni-directional antenna.
-
ECSM: Equivalent Capacitance Fixture Kit
2/19/2025
This Equivalent Capacitance Fixture is used for the verification and calibration of the active monopole antennas.
-
SAS-550-1B Battery Operated Active Monopole - 9 KHz - 60 MHz
11/22/2008
The SAS-550-1B Active Monopole Antenna is an active, general-purpose, receive-only antenna that covers 9 KHz - 60 MHz frequency range. It is ideal for instantaneous bandwidth scanning (without tuning) of electric fields in its frequency range and can drive any receiver with 50-ohm input impedance.
-
FCC-4 Tuned Dipole Antenna - 325 MHz - 1000 MHz
11/22/2008
A.H. Systems FCC-4 half-wave dipole antenna, consisting of a matching balun, two horizontal elements, and a mounting clamp and tape measure to adjust the element lengths, is the simplest form of antenna.
-
TDS-535-2 Tuned Dipole Set (Double)
11/13/2008
The A.H. Systems' Tuned Dipole Set provides an accurate standard for precise EMI and site attenuation measurements (per OET-55 and ANSI C63.4). Each Tuned Dipole Set is manufactured per the FCC balun design and is individually calibrated.
-
Dipole Antennas
10/21/2008
A.H. Systems offers a range of half wavelength resonant dipole antennas with operation frequencies between 25 MHz and 3 GHz as the foundation of every compliance testing lab. Ideal for site attenuation measurements, each antenna is manufactured with a balun loss of less than 0.5 dB and a VSWR ratio of less than 1.5:1.
-
TDS-535 Tuned Dipole Set (Single)
11/13/2008
Model TDS-535 Tuned Dipole Set provides an accurate standard for precise EMI and site attenuation measurements (per OET-55 and ANSI C63.5). This half wavelength dipole set is manufactured per the FCC balun design and is individually calibrated per ANSI C63.5 at 3 and 10 meters.
-
SAS-551 Passive Monopole Antenna
11/22/2008
The SAS-551 Passive Monopole Antenna provides superior performance in electric field measurements. The Passive Monopole Antenna is used for transmitting to perform shielding effectiveness and immunity testing.