Mixers/Modulators Products & Services
-
W-Band Quadrature (I/Q) Mixer
3/30/2012
This W-Band quadrature (I/Q) mixer is ideal for applications involving ranging radar systems, phase detectors, communication systems, and test instrumentation.
-
Wideband Analog Mixer, Diff. Amplifier for Hi-Freq: ML12002CP
8/31/2010
The ML12002 is a double balanced analog mixer, including an input amplifier feeding the mixer carrier port and a temperature compensated bias regulator. The input circuits for both the amplifier and mixer are differential amplifier circuits. The on-chip regulator provides all of the required biasing.
-
Wideband Mixers
3/30/2011
Wideband Mixers from Lansdale Semiconductor, Inc.
-
High Linearity/IP3 Mixer For Intermodulation Distortion Suppression: T3
3/28/2012
The T3 (Two-Tone-Terminator) High Linearity/IP3 Mixer was developed by Marki Microwave to address intermodulation distortion suppression in modern military and commercial RF/Microwave systems. It features low conversion loss (<7 dB), unparalleled IMD suppression, a high 1dB compression point, and more. It’s based on the most sophisticated mixer circuit technology commercially available today.
-
V-Band, Externally Biased Balanced Mixer
3/30/2012
This externally biased balance mixer operates in the V Band and is ideal for applications involving radar systems, test instrumentation, and communication systems.
-
Millimeter Wave Subharmonic Mixers: MSH Series
8/28/2012
The MSH Series of millimeter wave subharmonic mixers are ideal for heterodyne radiometer applications, instrumentation, automated test equipment, and for frequency extension to 193 GHz.
-
18 – 40 GHz Broadband Subharmonically Pumped Mixer: Model SFS-18340315-KFSFSF-N1-M
5/4/2018
The Model SFS-18340315-KFSFSF-N1-M from SAGE Millimeter is a broadband subharmonically pumped mixer operating in the 18 to 40 GHz frequency range for use in radar systems, communication systems, and test equipment. Utilizing a high performance GaAs MMIC with superior RF performance, this mixer provides a conversion loss of 15 dB.
-
Image Reject, IQ, And Single Sideband Mixers
3/30/2012
Marki Microwave’s image reject, IQ, and single sideband mixers offer superior performance and are built to the same standards as their catalog mixers.
-
Millimeter Wave Biasable Balanced Mixers
8/28/2012
Millitech’s line of millimeter wave biasable balanced mixers are ideal for applications involving receiver subsystems, test equipment, broadband downconverters, and EW/ELINT. Two different series of mixers are available. The MXB biasable mixers are not recommended for new designs. See the MB1 series datasheet below for an updated line of millimeter wave biasable mixers.
-
Millimeter Wave General Purpose Harmonic Mixer: MHP Series
8/28/2012
Millitech’s Millimeter Wave General Purpose Harmonic Mixer is ideal for applications involving signal processing, phase-lock loops, EW/ELINT, and spectrum analyzers/frequency counters. They’re low cost, and feature full waveguide bandwidth, high sensitivity, and low conversion loss.