Products and Services

  1. Front End Module And Low Noise Amplifiers For Wi-Fi Applications

    Qorvo offers a front end module (FEM) and two low noise amplifiers (LNAs) designed specifically for Wi-Fi applications such as access points and wireless routers.

  2. High Linearity Wideband LNA in a Miniature Form Factor: µHILNA™: 50 to 1500 MHz, 20 dB Gain

    NuWaves’ µHILNA™ is a high linearity, wideband LNA (low noise amplifier) with a form factor of 1.00″ x 0.75″ x 0.50”. In addition to its miniature size, the LNA features reverse voltage protection, a ruggedized, fully characterized assembly, application diverstity, high intercept, a wide dynamic range and wide operational voltage range, multi-octave frequency coverage, reverse voltage protection, low cost, and much more.

  3. MwT-0206S-A9N2/0206Z-A9N2: 2 To 6 GHz Low-Noise Amplifier Module
    The MwT-0206S-A9N2/0206Z-A9N2 is a low noise open-carrier amplifier module operating between 2 and 6 GHz. Its input and output ports are matched to 50 O impedance.
  4. SiGe: C Low Noise Amplifiers (LNAs)
    NXP Semiconductors has released new low noise amplifiers with the ability to dynamically suppress strong transmit signals. These LNAs improve GPS signal reception, linearity, and noise figure.
  5. Variable Gain High Linearity, Low Noise Amplifier: RFLA1018
    RFMD's RFLA1018 is an analog-controlled voltage-variable gain amplifier featuring high linearity and very low noise figure. This LNA with bypass mode and variable attenuator provides over 35dB of dynamic gain range. The RFLA1018 has a 3.3V control range with maximum gain at 0V. The LNA is temperature compensated to reduce gain variation. A noise figure of 0.65dB and an IIP3 of 2dBm make this component ideal for receiver input lineups. The RFLA1018 is packaged in a small 8.0mm x 8.0mm leadless laminate MCM. This module is internally matched to 50Ω on all RF ports, making it easy to use with no external matching components required.
  6. Ka Band Low Noise Amplifier: AML1820L3611
    The AML1820L3611 from Microsemi is a low noise amplifier (LNA) that operates in the Ka Band.
  7. 40MHz to 1008MHz High Linearity, Low Noise GaAs Amplifier: RFCA8818
    This GaAs amplifier operates in the 40 MHz to 1008 MHz frequency range and features a 2.0dB noise figure, 12dB small signal gain, internally matched input and output, a single 5V to 8V positive power supply, and more.
  8. Ultra-Low Noise Amplifier: SKY67151-396LF

    This high performance, GaAs, pHEMT low-noise amplifier (LNA) covers the 0.7-3.8 GHz frequency range and is ideal for applications involving LTE, GSM, WCDMA, HSDPA macro and micro base stations, high temperature transceiver applications, L and S band ultra-low noise receivers, cellular repeaters, and DAS, and RRH/RRUs.

  9. High-Linearity, Low-Noise Amplifiers
    The Ciao Wireless High Linearity LNAs eclipse the industry accepted standard "10-dB separation rule" ("headroom") for Output ICP3 separation above the 1-dB Compression Point. Ciao Wireless' Ultra-High Linearity LNAs feature an extended headroom of typically 16 to 17 dB between the 1-dB Compression Point and Output 3rd Order ICP. Typical Output 3rd Order ICP values range up to +42dBm for Octave Band Models with an Output P1-dB Point of +22 to +25 dBm.
  10. Low Noise Millimeter Wave Amplifiers (LNA)

    Low noise amplifiers (LNAs) from Millitech feature state-of-the-art noise figure performance, wideband coverage, a modular, compact design, internal voltage regulation and bias circuitry, and 2.92, 2.4, 1.85 mm or Waveguide interfaces (as required).