Products and Services

  1. 40 MHz – 1 GHz Broadband CATV Low-Noise Amplifiers

    Skyworks introduces two new broadband, 75 Ohm MMIC front-end, low-noise amplifiers (LNAs). The SKY65452-92LF and the SKY65450-92LF (with bypass mode) provide high linearity and excellent gain over a wide frequency range of 40 MHz to 1 GHz with minimal external components. In addition, these LNAs offer low current consumption, low noise figure, and deliver energy-saving features.

  2. General-Purpose, Low-Noise Amplifier For Diverse 1.5 To 3.0 GHz Wireless Applications: SKY67014-396LF
    Skyworks’ New Ultra Low Current, General Purpose Low Noise Amplifier for Diverse 1.5-3.0 GHz Wireless Applications. Skyworks is pleased to introduce a new LNA, the SKY67014-396LF, for battery powered receiver applications in the 450, 900 and 2400 MHz ISM bands. For more information, please visit us at IMS2011 MTT-S booth 1428, or download the available datasheet below.
  3. Low-Noise Amplifier With Bypass/Shutdown Mode In Low Profile Package - MGA-645T6
    Avago Technologies’ MGA-645T6 is an economical, easy-to-use GaAs MMIC Low Noise Amplifier (LNA) with Bypass/ Shutdown mode. The LNA has low noise and high linearity achieved through the use of Avago Technologies’ proprietary 0.5um GaAs Enhancement-mode pHEMT process.
  4. 20 MHz to 8 GHz Gain Block Amplifier: AM1023

    This gain block amplifier covers the 20 MHz to 8 GHz frequency range. It exhibits flat gain (19 dB), a 2.5 dB noise figure, and unconditional stability over the -40C to +85C operating temperature range. It comes in a 3mm QFN package and is operational to 1.7V.

  5. Dual-Band (2.4-2.5) GHz And (4.9-6) GHz WLAN Low-Noise Amplifier - ALM-2812
    Avago Technologies’ ALM-2812 is a dual-band LNA designed for WLAN applications in the (2.4 - 2.5)GHz and (4.9-6)GHz frequency ranges. The LNA uses Avago Technologies’ proprietary GaAs Enhancement-mode pHEMT process to achieve high-frequency wideband operation with very low noise figures.
  6. High Gain Two Stage LNAs
    Skyworks is pleased to introduce a series of high gain, two stage LNAs employing both GaAs pHEMT and GaAs HBT technology that offer very low noise figure, high linearity and excellent return loss in a small, quad flat, 4 mm squared leadless package. On-die, active-bias design ensures consistent performance and enables unconditional stability. The pHEMT front-end enables ultra low noise figure, while the HBT-based output stage provides customers a compelling solution with both high linearity and efficiency.
  7. Low Noise, Low Current Amplifier: SKY67015-396LF

    This low noise amplifier (LNA) covers the 0.03 to 0.3 GHz frequency range and features low NF (0.8 dB @150 MHz), 18.5 dB @150MHz gain, a flexible supply voltage from 1.8 to 5.0V, improved NF and linearity, and an adjustable supply current for higher IIP3.

  8. Ultra-Low Noise Figure Amplifiers With 0.3 dB Typical Noise Figure
    Ciao Wireless introduces its new line of Ultra-Low Noise Amplifiers with Noise Figures as low as 0.30 dB typical between 1.0 – 2.9 GHz with delivery in 1-2 WEEKS ARO.
  9. Ultra Low Phase Noise RF Amplifier: HX2400
    The Holzworth HX2400 is a broadband, Ultra Low Phase Noise RF Amplifier originally designed for use in laboratory and measurement applications where low phase noise and low additive jitter are critical. The proprietary circuitry allows for broadband, ultra low phase noise performance while being powered via a typical bench top power supply.
  10. Low Noise Amplifiers (LNAs)

    NIC introduces its Wideband LNA designed for C Band, Radar and Satcom applications. This amplifier operates in the frequency range of 4 GHz – 5 GHz, providing high gain, low Noise Figure and is built in an extremely small package size of 1.2 x 0.9 x 0.4 in. Features:1) High Gain- 23dB typ; 2) Low Noise Figure- 0.9dB typ;3) Custom designs available