Products and Services

  1. Transmit/Receive Front-End Module: SKY65377-11
    5/21/2015

    The SKY65377-11 is a transmit/receive (T/R) front-end module designed to provide a complete T/R train with T/R switches. Mounted in a 28-pin, 6x6mm Multi-Chip Module (MCM) surface-mount technology package, this device provides a highly manufacturable low-cost solution for many transmit/receive applications.

  2. 2.4 GHz Front-End Module For ZigBee®, Thread, And Bluetooth® Smart Applications: SKY66112-11
    12/8/2016

    The SKY66112-11 is a 2.4 GHz fully integrated RF Front End Module (FEM) designed to deliver high performance in ZigBee®, Thread, And Bluetooth® Smart applications such as in-home appliances, smart thermostats, IoT devices, smart lighting, sensors, and range extenders.

  3. Low-Noise Amplifier Front-End Module With GPS/GNSS/BDS Pre- And Post-Filters: SKY65903-11
    5/17/2016

    Skyworks offers the SKY65903-11 front-end module (FEM) with an integrated low-noise amplifier (LNA) and pre- and post-filters that is ideal for GPS/GNSS/BDS receiver applications. The LNA uses surface-mount technology (SMT) in the form of a 2.5 x 2.5 mm Multi-Chip Module (MCM) package, which allows for a highly manufacturable and low-cost module solution.

  4. 3.3V 5GHz 802.11a/n Front-End Module: RF5516
    10/3/2011
    RFMD’s RF5516 3.3V 5GHz 802.11a/n Front-End Module features a single supply voltage of 3.0V to 4.8V, an integrated 5Ghz Amplifier, an LNSA, and a SPT2T TX/RX Switch. It’s ideal for IEEE802.11a WiFi, and 5GHz ISM Band applications, and with portable battery powered equipment.
  5. LTE Universal Multi-Band Front-End Module For IoT: SKY68001-31
    1/17/2018

    Skyworks offers the new SKY68001-31 LTE universal multi-band front-end module made for cellular IoT modem devices targeting LPWAN, LTE universal modem products operating in low-band B5/B8/B12/B13/B17/B18/B19/B20/B26 and mid-band B1/B2/B3/B4/B25/B39/B66 frequencies, and PAE optimized for Class 3 LTE output power. The cost-optimized module features a low-loss post-PA transmit front end for enhanced efficiency, a broadband PA supporting APT mode of operation or Vcc fixed supply, and integrated low-pass filters for harmonic rejection.

  6. A Complete Solution: SKY85806-11 WLAN Front-end Module
    2/20/2015

    This wireless front-end-module features the functionality of a power amplifier, a power detector, a transmit/receive T/R) switch, and a diplexer with additional filtering and associated matching functionality. It’s been designed to provide a complete 2.4 GHz to 5 GHz WLAN RF solution in a QFN 28-pin, 4.0 x 3.0 x 0.8 mm package.

  7. 433-MHz To 470-MHz Transmit/Receive Front End Module: RF6504
    2/2/2012
    The RF6504 Transmit/Receive Front End Module features 1 dB interface Rx insertion loss, a separate 50? Tx/Rx Transceiver, and 30 dBm Tx output power. Two separate ports can be found on the device (Rx and Tx) The Rx port is a pass through port, and the Tx section provides a PA with nominal output power of 30dBm and 15dB gain. Both combine to one antenna port with a SP2T switch.
  8. 5 GHz WLAN Front-End Module (FEM): SKY65525-11
    1/9/2013

    This 5 GHz WLAN Front-End Module (FEM) is highly integrated and ideal for WiFi enabled handsets, tablets, and mobile/portable systems, system-in-package (SIP) modules for embedded systems, and WLAN-enabled wireless video systems.

  9. 3.3V, 2.4GHz Front End Module: RF6575
    8/9/2011
    The RF6575 3.3V, 2.4GHz Front End Module integrates a complete solution in a single Front End Module (FEM) for WiFi and ZigBee® applications in the 2.4GHz to 2.5GHz band. This FEM integrates the PA plus harmonic filter in the transmit path. The RF6575 has an integrated LNA. Also, the RF6575 provides a single balanced TDD access for RX and TX paths along with two ports on the output for connecting a diversity solution or a test port.
  10. 3.6V, Single-Band Front End Module: RFFM3482E
    12/8/2011
    RFMD's RFFM3482E is a single-band front end module (FEM) ideal for applications involving IEEE802.11b/g/n WiFi, 2.5GHz ISM Bands, portable battery-powered equipment, WiFi systems, and more. Its size is ideal for a 802.11b/g/n front end design and greatly reduces the number of components outside of the core chipset. This FEM has the ability to switch between WiFi Rx, WiFi Tx, and BTH Rx/Tx operations. An Rx balun, a b/g/n power amplifier, and a directional power detector have all been integrated into the RFFM3482E.