The SKY66101-11 RF and SE2435L are front-end modules (FEMs) designed specifically for industrial, scientific, medical (ISM) band applications with operation in the 902-928 MHz, or 860-930 MHz frequency range. These devices feature a fully matched 50 Ω input and output, and RF blocks that operate over a 2.0-4.8 V range for use in a wide range of battery powered applications.
The SKY66113-11 and SKY66114-11 are 2.4 GHz fully integrated RF Front-end Modules (FEMs) designed to deliver high performance in Bluetooth Low Energy/Bluetooth Smart, 802.15.4, Thread, and ZigBee applications such as in smart thermostats, in-home appliances, beacons, gateways, sensors, and wearable devices.
This front end module (FEM) features an ultra-small form factor and is ideal for IEEE802.11a/n/ac WiFi applications, 4.9GHz to 5.85GHz ISM Band applications, applications involving portable battery powered equipment, and applications involving WiFi access points, gateways, and set top boxes.
Skyworks offers the SKY65903-11 front-end module (FEM) with an integrated low-noise amplifier (LNA) and pre- and post-filters that is ideal for GPS/GNSS/BDS receiver applications. The LNA uses surface-mount technology (SMT) in the form of a 2.5 x 2.5 mm Multi-Chip Module (MCM) package, which allows for a highly manufacturable and low-cost module solution.
The SKY78010 and SKY78011 are multiband, multimode front end modules (FEMs) that are fully optimized and 100% RF tested. They’re both significantly smaller than the industry’s most advanced approach to FEMs, measuring in at 7 x 9.8 x 1.05 mm. They feature a 2G quad-band and 3G/4G penta-band GPIO control interface, and the world’s best linearity and PAE for smart RF integration.
Qorvo presents a new series of high-linearity 2.5 GHz Front-End Modules (FEMs) built for automotive Wi-Fi applications, 802.11b/g/n, and Bluetooth® systems. These devices feature integrated b/g/n power amplifiers, directional power detectors, RX balun, and TX filtering. Each FEM contains an ultra-small form factor and integrated matching that greatly reduces the number of external components and layout area in the customer application.
The RF5345 FEM is a single-chip integrated front-end module (FEM) for high-performance WLAN applications in the 2.4GHz to 2.5GHz ISM band. The FEM addresses the need for aggressive size reduction for a typical IEEE802.11b/g front-end design and greatly reduces the number of components outside of the core chipset.
Qorvo’s integrated front end modules (FEMs) are included with a compact form factor and integrated matching that minimizes the layout area in Wi-Fi 802.11 a/n/ac and 802.11 b/g/n system applications. Their performance is focused on conserving power consumption while maintaining the highest linear output power and leading edge throughput.
|
|
|
|
|
|
|
|
|