Featured Videos

  1. Introduction To GNSS Low-Noise Amplifier Front-End Modules With Integrated Pre-Filters And Post-Filters
    9/12/2018

    Skyworks offer two new front-end modules (FEMs) for GNSS/GPS/GLONASS/Galileo/Compass/QZSS radio receiver applications in the 1559 to 1606 MHz frequency range. The SKY65933-11 and the SKY65943-11 feature an integrated low noise amplifier (LNA), and a pre-filter and post-filter. Both devices use surface-mount technology (SMT) in the form of a 2.5 x 2.5 mm Multi-Chip Module (MCM) package, which allows for a highly manufacturable and low-cost solution.

  2. Introduction To 860 To 930 MHz RF Front-End Modules SKY6642x Series
    9/12/2018

    Skyworks’ newest family of compact, high performance RF front-end modules (FEMs) is specifically designed for LPWAN – supporting LoRa®, SigFox and other unlicensed band technologies – as well as high-power Industrial, Scientific, Medical (ISM) applications operating in the 860-930 MHz frequency range.  These new solutions deliver improved sensitivity and more than quadruple the operating range versus a standalone system-on-chip (SoC).

  3. AR’s new COO, John Kim, At The 2018 IEEE EMC Symposium
    8/16/2018

    AR’s new COO, John Kim, gives a quick summary of the AR service oriented culture and divisions worldwide at the 2018 IEEE EMC Symposium. #AR50YearsStrong

  4. Measuring Transients With A Signal Source Analyzer - Tutorial Video
    8/16/2018

    Measure frequency vs. time using the new Transient Mode measurement option on the Berkeley Nucleonics Phase Noise Tester. This measurement mode enables both wide band and narrow band measurements with high measurement rates and long measurement spans (track drift over time). Use the wide band measurement to analyze large frequency changes.  Measure and characterize a 100 uS transient period between a 1 GHz and 2 GHz signal from an RF Signal Generator. Measure and characterize a 10 kHz frequency modulation.

  5. Measure Ultra-Low Phase Noise with External References - Tutorial Video
    8/13/2018

    This video provides a short tutorial on measuring ultra-low phase noise on a 100MHz OCXO using tunable external references.  Measure over a wide range, 1Hz to 50MHz offset, using just 2 cross correlations. You can also measure -182 dBc at 1MHz, -177dBC at 10kHz, and -162 dBc at 1kHz.

  6. New Solid State Amplifier And Antenna Systems Generate Up To 50 v/m Fields
    8/13/2018

    At IEEE EMC SIPI 2018, AR demonstrates its new “AA” Series produce field strengths up to 50V/m in two band-specific models over the 18 to 40 GHz frequency range when driven with a suitable signal generator.

  7. Multi-Tone Testing Saves Time And Has A Big Return On Investment
    8/13/2018

    In this video, Sangam Baligar discusses multi-tone testing and the impact it has on time consumption and Return on Investment.

  8. Web Enabled Amplifier With Rob Rowe
    8/13/2018

    At the 2018 EMC SIPI Show, Rob Rowe discusses the AR web-enabled amplifier that can be controlled remotely without buying any new software.

  9. Joe DiBiase Talks AR Systems
    8/13/2018

    EMC TV interviews Joe DiBiase on the different advantages that AR’s systems offers to customers.

  10. Chatting With Don Shepherd At The 2018 EMC SIPI Show
    8/13/2018

    In this video, EMC TV interviews Don Shepherd, founder of AR (Amplifier Research), at the 2018 EMC SIPI Show.