2450/5400 MHz Diplexer (2450DP15F5400E)
2450/5400 MHz Diplexer (2450DP15F5400E) by Digi-Key
ESMR Duplexer - WSD-00420
K&L’s WSD-00420 ESMR duplexer is reaching thresholds of this technology with it’s extreme low insertion loss and
tight rejection at 861.5 MHz this filter has been optimized for performance and cost
This cavity duplexer for WiMax applications features a small form factor, low insertion loss, high channel selectivity, high isolation, with both custom and standard designs available. Its low channel center frequency runs from 3400 to 3500 MHz, and its high channel center frequency runs from 3500 to 3600 MHz. This WiMax Duplexer’s operating temperature runs from -40 °C to +90 °C, has SMA female connectors, has 100 MHz channel separation, 40MHz channel bandwidth, 1.5 dB max passband insertion loss, and 16 dB min passband return loss.
260/915 MHz Diplexer - Lumped Component Diplexer
Features: SMA Connectors, 1.5:1 VSWR from 20 MHz to 1200MHz
The electronics industry is truly dynamic. Digi-Key represents one of the fastest-growing electronic component distributors within that marketplace. The company's remarkable sales growth and its ability to consistently out perform the industry is the best evidence of Digi-Key's superior service.
UMTS Band 4/CDMA AWS-1 Duplexer: ACMD-7609
The Avago ACMD-7609 is a highly miniaturized duplexer designed for use in UMTS Band 4 and CDMA AWS–1 (1710 – 1755 MHz UL, 2110 – 2155 MHz DL) handsets and mobile data terminals.
High Performance AWS Diplexer
This diplexer model has been designed for applications that require a high level of TX-RX isolation. It has a temperature range of -20 to +85°C and a maximum VSWR of 1.5:1.
Ku-Band Integrated Duplexer and Low Noise Amplifier
e2v technologies have developed a Ku-band
Duplexer, with integrated Low-Noise Amplifier
(LNA), and integrated monitoring within the
Trans Tech, Inc. offers a new, GPS diplexer for systems utilizing both L1 (1575 MHz) and L2 (1227 MHz).
High-Power And Broadband Matched Band-Pass/Band-Stop Diplexers
Designed for testing applications, K&L Microwave’s band-pass/band-stop diplexers feature broadband matching at the common port, low insertion loss, and high isolation. These diplexers are also used in band combining/splitting applications, up/down converters, and in multiplexer modules...