Products and Services
-
50 Ohm Coaxial Cable Solution: UTiFLEX-HF
3/28/2018
Carlisle Interconnect Technologies offers UTiFLEX-HF coaxial cables designed to provide a solid cable assembly solution operating from DC to 65 GHz range for 50 Ohm applications where flexibility is a key requirement. The cable solutions feature 70% VP cables and premium 80-85% VP cables for when critical applications need a phase stable solution with minimal signal loss.
-
Thermal-Vacuum Test Cable: Altitude Test TV Series
3/2/2011
This super-flexible test cable is made with our industry-leading GrooveTube® technology outer conductor, recognized for superior phase and amplitude performance under flexure. Uses include spacecraft and component test applications. Only low outgassing materials are used (NASA RP 1124) and connectors are vented for vacuum compatibility. Cable is thermal-cycled prior to shipment.
-
EMC Lab Test Cables
2/25/2016
MegaPhase offers low-density, dielectric EM series test cables specifically designed for the needs of EMC lab technicians. The cable assemblies offer excellent shielding effectiveness, crush resistant armoring, and are constructed using materials that meet electromagnetic compatibility standards.
-
XtendedFlex Continuous/High Flex Coaxial Cable: XF-178
3/27/2023
XtendedFlex™ is a solution for applications requiring constant cable motion and flexibility. Its innovative design and unique material composition ensure consistent performance under millions of flexures.
-
Solderless Flexible Coaxial Cable Assembly: Microbend L
11/15/2016
Huber+Suhner’s microbend-L is a direct replacement for 0.047 inch semi-rigid cables offering low profile, internal, point-to-point interconnections between RF modules within communication systems. With increased phase stability and power handling capacity, this cable assembly offers preassembled and tested high performance in a cost effective alternative with an array of configurations.
-
Tower Series Corrugated Antenna Feeder & Jumper Cables
3/11/2011
The Tower Series cable uses a Low Loss Polyethylene Foam with very low dielectric losses resulting in low attenuation of RF power. Used as antenna feeders, cabling of antenna arrays, radio equipment interconnections, jumper assemblies or indoor applications, the Tower Series cable provide a good solution for many wireless applications.
-
LMR Low Loss Cables: TowerFlex Series
3/10/2011
MegaPhase’s Low Loss TowerFlex Series coaxial cables feature a closed micro-cell polyethylene dielectric anprovide an excellent flexible solution for communication systems. Low Loss Tower Series Cables are cost effective and are available with most standard RF/Microwave connectors including SMA, Type N and TNC . Standard jacketing is UV Resistant Polyethylene.
-
Coaxial Cable Driver: CTS10EL89
12/4/2013
The CTS10EL89 is a coaxial cable driver with internal input pull-down resistors and a 375ps propagation delay. It’s well suited for digital video applications as each of its outputs can be used as an independent driver.
-
Flexible Semi-Rigid Alternative Cables: JumpShot
3/10/2011
The GB Series cables are a flexible alternative to semi-rigid cables. They use the same connectors and assembly tooling used for .086 and .141 versions. These cables offer a solution to situations where compact interconnects are needed. By using the GB series cables you eliminate the cost of design and drawings which semi-rigid cables would require.
-
Low Loss Armored Test Cables Through 40 GHz: EMC Lab EM Series
3/2/2011
MegaPhase designed its EM Series test cable specifically for the needs of EMC lab technicians. These cables feature exceptionally low insertion loss, excellent shielding properties and crush-resistant armoring. All plug connectors (except precision airlines) are supplied with conductive interface gaskets to minimize RF leakage. Phase matching, alternate jacket and other features available on request.