Products and Services
-
Cable and Antenna Analyzers
8/18/2015
Anritsu offers a variety of cable and antenna analyzers designed for efficiently maintaining legacy networks in addition to the 3G and 4G wireless networks that are popular today. These analyzers can be used in cable & antenna installation and maintenance, phase matching cables, antenna tuning, RF component testing, antenna testing macro site cable system testing, Distributed Antenna System (DAS) testing, and much more. Typical industries that use these devices include defense and aerospace, R&D, cellular networks, education, public safety, and satellite networks.
Click the product names below for more information about each analyzer.
-
50 Ohm Coaxial Cable Solution: UTiFLEX-HF
3/28/2018
Carlisle Interconnect Technologies offers UTiFLEX-HF coaxial cables designed to provide a solid cable assembly solution operating from DC to 65 GHz range for 50 Ohm applications where flexibility is a key requirement. The cable solutions feature 70% VP cables and premium 80-85% VP cables for when critical applications need a phase stable solution with minimal signal loss.
-
XtendedFlex 045 Micro-Coaxial Cable
5/24/2023
XtendedFlex 045 is a revolutionary cable in the XtendedFlex product line that boasts unrivaled compactness and flexibility.
-
Flexible Semi-Rigid Alternative Cables: JumpShot
3/10/2011
The GB Series cables are a flexible alternative to semi-rigid cables. They use the same connectors and assembly tooling used for .086 and .141 versions. These cables offer a solution to situations where compact interconnects are needed. By using the GB series cables you eliminate the cost of design and drawings which semi-rigid cables would require.
-
Solderless Flexible Coaxial Cable Assembly: Microbend L
11/15/2016
Huber+Suhner’s microbend-L is a direct replacement for 0.047 inch semi-rigid cables offering low profile, internal, point-to-point interconnections between RF modules within communication systems. With increased phase stability and power handling capacity, this cable assembly offers preassembled and tested high performance in a cost effective alternative with an array of configurations.
-
PIM Series Cable Assembly
4/5/2014
MegaPhase’s PIM series cable assembly has a 4 GHz maximum frequency, 50 Ω nominal impedance, a 69% nominal propagation velocity, 1.47 ns/ft time delay, -110 dB (minimum) shielding effectiveness, and 165 (dBc minimum) passive intermodulation.
-
Microwave And RF Test Assemblies: GORE® PHASEFLEX® Series
7/13/2018
The GORE® PHASEFLEX® Series offers the smallest, lightest, internally ruggedized microwave/RF test assemblies for high density interconnection in RF and uW modular applications as well as in high speed digital testing. These assemblies feature ON cable construction and provide consistent, repeatable measurements with electrical performance up to 18, 26.5, 40, or 50 GHz.
-
Portable RF Analyzer Phase Stable Cable Assemblies
10/25/2017
Fairview Microwave introduces a new series of rugged, portable, phase stable RF analyzer cable assemblies ideal for handheld network analyzers, base station analyzers, portable spectrum analyzers, field testing, tower measurements, distance-to-fault measurement, and site maintenance applications. These 19 analyzers deliver excellent amplitude, phase stability with flexure, and operate at a maximum of 27 GHz.
-
VNA Test Port Extension Cables
2/10/2011
MegaPhase's industry-leading VNA port extension test cables have been optimized to reduce the time associated with test equipment calibrations where compensation for loss, mismatches, and feed-throughs are critical to the test outcome. These mechanically stable test cables can be used repeatedly, and can be bent with little effect on the insertion loss, phase, or VSWR.
-
Test And Measurement Cables
3/2/2011
MegaPhase has designed standard and unique high performance connectors and adapters. We offer a wide variety of standard connectors some of which include SMA, TNC, BNC, 2.4mm, 2.92mm, 3.5mm, 1.85mm, Type N and many more. In addition to the standard designs MegaPhase offers unique designs including our ZMA and ZN connectors for a quick disconnect bayonet style coupling these connectors offer RF keying if desired. We have designed standard straight and right angle adapters with in-series and between-series connectors. Applications include defense and commercial uses, and they are ideal for Probe Station Testing through 50 GHz. Our adapters feature linear phase slope, low SWR, and high reliability. When standard off the shelf RF connectors don’t meet your needs, our Engineering staff works with you to design interconnect products to meet your requirements, or re-engineer obsolete connectors. MegaPhase will provide excellent interconnect products that will allow you to focus on other aspects of your system design. The quality of these products is derived from our engineering staff’s years of experience in the design of custom connectors serving Defense, Commercial, and Aerospace Customers.