Attenuators Products
-
NetSync™ Low Phase Noise Jitter Attenuating Clock For 5G/eCPRI/SyncE/IEEE: Si5518B
9/14/2022
The Si5518B NetSync Network Synchronizer Clock combines the functions of a SyncE/IEEE 1588 PTP network synchronizer clock with a low phase noise 5G/eCPRI wireless jitter attenuator into a single IC device.
-
Passive GaAs MMIC Attenuator Family: ATN00-00110CH
10/23/2023
The ATN00-00110CH family of precision GaAs MMIC fixed attenuators are an ideal solution for attenuating a signal, and they can be used in a wide range of applications.
-
200-7125 MHz Attenuator Assemblies For Automated Testing At 0-95dB By 1dB Steps
3/8/2023
These attenuator assemblies operate at 200-7125 MHz with an attenuation range of 0-95dB by 1dB steps.
-
Chip Scale Package MMIC 50 GHz 10dB Attenuator: ATN10-0050CSP1
2/10/2023
The ATN10-0050CSP1 is a surface mount GaAs MMIC 10dB attenuator in a chip scale package (CSP). This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
-
5W Attenuator With 2.92mm, DC-40 GHz
11/6/2023
The Model 50HFFB-xxx-5/40 DC-40 GHz attenuator is rated for a 5-watt average and is available with 2.92mm male/female connectors.
-
Wireless Jitter Attenuators
9/14/2022
The Skyworks family of wireless jitter attenuators offers CMOS integration, reduced power, low noise and size without compromising the stringent performance and reliability required in wireless applications.
-
100W Fixed Attenuator Covering DC - 8.4GHz
12/18/2023
Model 50HFFE-xxx-100/8 is a 50 Ohm coaxial fixed attenuator rated at 100 Watts average input power and operates DC-8.4 GHz. This model is available with N or SMA connectors.
-
200-7125 MHz Benchtop Attenuator Assembly With 2 Attenuators: 50BA-057-95
3/9/2023
Model 50BA-057-95 is a 50 Ohm benchtop attenuator assembly containing two solid-state step attenuators with a range of 0 to 95dB by 1dB steps and operates from 200 MHz to 7125 MHz.
-
Die On Carrier, Silicon Digital Attenuator: ADRF5474
6/17/2022
The ADRF5474 is a 4-bit digital attenuator with 22 dB attenuation control range in 2 dB steps manufactured in a silicon process attached on a gallium arsenide (GaAs) carrier substrate. The substrate incorporates the bond pads for chip and wire assembly, and the bottom of the device is metalized and connected to ground.
-
200-7125 MHz, 19" Rack Mount Attenuator Assembly With 9-16 Attenuators: 50PA-1250-XX
3/9/2023
Model 50PA-1250-XX is a 19 inch rack mount attenuator assembly containing 50 Ohm solid-state step attenuators. The number of attenuators can be selected from 9 to 16 attenuators.