Attenuators Products
-
5W Attenuator With 2.92mm, DC-40 GHz
11/6/2023
The Model 50HFFB-xxx-5/40 DC-40 GHz attenuator is rated for a 5-watt average and is available with 2.92mm male/female connectors.
-
0dB DC - 40GHz MMIC Attenuator: ATN00-0040PSM
11/21/2023
The ATN00-0040PSM is a surface mount GaAs MMIC 0dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
-
6dB DC-40GHz Surface Mount Attenuator: ATN06-0040PSM
2/21/2024
The ATN06-0040PSM is a surface mount GaAs MMIC 6dB attenuator in a DFN package. This attenuator is an ideal solution for attenuating a signal and can be used in a wide range of applications.
-
200-7125 MHz Benchtop Attenuator Assembly With 2 Attenuators: 50BA-057-95
3/9/2023
Model 50BA-057-95 is a 50 Ohm benchtop attenuator assembly containing two solid-state step attenuators with a range of 0 to 95dB by 1dB steps and operates from 200 MHz to 7125 MHz.
-
NetSync™ Network Synchronizer Clock For 5G/SyncE/IEEE 1588 applications: Si5403B
9/14/2022
The Si5403B NetSync Network Synchronizer Clock utilizes DSPLL technology and is capable of meeting the requirements of SyncE-compliant wander filtering and software adjustment of output frequency and phase for IEEE 1588 applications.
-
Die On Carrier, Silicon Digital Attenuator: ADRF5474
6/17/2022
The ADRF5474 is a 4-bit digital attenuator with 22 dB attenuation control range in 2 dB steps manufactured in a silicon process attached on a gallium arsenide (GaAs) carrier substrate. The substrate incorporates the bond pads for chip and wire assembly, and the bottom of the device is metalized and connected to ground.
-
RF Fixed Attenuators With 2.4mm Connectors
3/8/2024
Elevate your signal management capabilities with Fairview Microwave's RF fixed attenuators featuring 2.4mm connectors and high-power ratings.
-
200-7125 MHz, 19" Rack Mount Attenuator Assembly With 9-16 Attenuators: 50PA-1250-XX
3/9/2023
Model 50PA-1250-XX is a 19 inch rack mount attenuator assembly containing 50 Ohm solid-state step attenuators. The number of attenuators can be selected from 9 to 16 attenuators.
-
Solid-State Programmable Attenuator: 50P-1501
8/16/2022
Model 50P-1501 is a 50 Ohm solid-state programmable attenuator with attenuation range 0 to 127dB by 1dB steps. It operates 200 MHz to 3 GHz and is rated for +20 dBm of RF input power. This step attenuator is available with BNC, N, or SMA coaxial RF connectors. The attenuator has seven individually controlled steps: 1dB, 2dB, 4dB, 8dB, 16dB, 32dB, and 64dB.
-
50W Attenuator With Cylindrical Heatsink: DC-18 GHz
8/28/2023
Model 50HFFA-xxx-50/18 is a 50 Ohm coaxial fixed attenuator rated at 50 Watts average input power and operates DC-18 GHz.