Analyzer Products & Services

  1. Power Master™ Frequency Selectable mmWave Power Analyzer: MA24507A 9/27/2016

    Power Master is an ultraportable, USB-powered mmWave power analyzer enabling simple, numeric, frequency-based measurement of RF power from 9 kHz to 70 GHz and as low as -90 dBm. Traditional power meters are broadband and have limited power ranges, so engineers and technicians are using spectrum analyzers which include many unneeded features, cost hundreds of thousands of dollars, and take up half the test bench just to make simple, frequency-based RF amplitude measurements. The Power Master enables those measurements in a USB-powered device slightly bigger than a smartphone and at a fraction of the price of a spectrum analyzer.

  2. Holzworth Phase Noise Analyzers: HA7062C 8/22/2016

    Holzworth presents the revised HA7062C Phase Noise Analyzer that is capable of reaching theoretical measurement limits for the highest performing DUTs. The HA7062C fully integrated phase noise analysis system is highly reliable and intuitive while offering real time measurement speeds for optimal manufacturing test throughput. The HA7062C is also a cost effective solution for R&D, delivering measurement floors below -190 dBc/Hz.

  3. Rack Mount Extended Frequency Remote Spectrum Analyzer: EVO-RSA-6070A 1/31/2019

    Avcom offers the new EVO-RSA-6070A as part of the EVO Series of rack mount analyzers. This extended frequency remote spectrum analyzer is designed to operate in the 70 MHz – 6 GHz frequency range. This SDR-style technology analyzer with a wide bandwidth receiver, employing FPGA, DSP, and high-performance processors. The analyzer is based on a hybrid swept-FFT technology which provides extended frequency range and higher resolution.

  4. FFT Analyzer: EHP-50F 6/2/2015

    The EHP-50F is a new FFT analyzer used to measure and analyze electric and magnetic strengths in the 1Hz to 400 kHz frequency range. Using the weighted peak method specified in the latest released standards, the analyzer evaluates complex signal shapes in the time domain, while providing automatic frequency evaluations for many applications including power supply stations and transformers, high-tension lines, industrial equipment, and medical technology.

  5. Mobile Interference Hunting System: MX280007A 8/18/2016

    Anritsu’s Mobile InterferenceHunter™ is a quick and reliable way to find multiple emitters, or single emitters even in difficult reception conditions. The ability to work with multiple signal sources, reflections, RF shadows, and multi-path distinguish the Mobile InterferenceHunter from conventional systems that depend solely on directional antennas. The ability to work with signals that are intermittent, bursty, or drift rapidly in frequency separate the Mobile InterferenceHunter from more expensive solutions targeted at a single fixed frequency interferer. The Mobile InterferenceHunter’s post-capture analysis capability allows users to modify search parameters without re-driving the route. This allows re-analysis of the captured data as well as consulting with experts.

    Applications:

    • CATV Leakage location
    • Simplified Spectrum Clearing
    • Locating interference – Even in the presence of uplink signals
    • Finding pulsed or bursty signals

     Key Features:

    • Post-capture analysis
    • Sorts out signal reflections, shadowing, and multi-path
    • Quick setup in any vehicle
    • Much faster than conventional direction finding techniques
  6. Handheld Vector Network Analyzer: R&S®ZNH 3/15/2021

    The R&S®ZNH from Rohde & Schwarz is a full two-port handheld vector network analyzer, offering one-port cable and antenna measurement and full two-port S-parameter measurements. The analyzer features a small form factor but can deliver high performance and all the key functionalities.

  7. 1-Port Vector Network Analyzer: MS46121B 7/10/2015

    The MS46121B is a series of two PC-controlled 1-Port USB ShockLine Vector Network Analyzers with frequency ranges of 40 MHz to 4 GHz and 150 kHz to 6 GHz. The MS46121B provides performance and accuracy for your 1 port measurements in a low cost and space saving solution that is small enough to directly connect to the device under test. All the members of the MS46121B series are aimed at RF and microwave applications in manufacturing, engineering and education. The two MS46121B options both come with 120 microsecond per point sweep speeds and a measurement accuracy of +/- 0.5 dB (-6 dB offset, typical), making them suitable for your passive device test applications.

  8. Handheld Cable And Antenna Analyzer: Site Master™ S331L 6/25/2012

    The S331L handheld cable and antenna analyzer is ideal for tower contractors and wireless service providers that need a rugged, handheld field instrument to provide high-performance cable and antenna analysis to ensure optimum deployment, installation, and maintenance of wireless networks.

  9. Spectrum and Signal Analyzer for Satellite Communications: NRA-2500 2/27/2014

    The NRA-2500 covers the 5 MHz to 2.5 GHz frequency range and is ideal for use as a starter model for satellite monitoring and control systems. It’s optimized for use in D-SNG vehicles, teleports, and in maritime applications.

  10. Portable RF Analyzer Phase Stable Cable Assemblies 10/25/2017

    Fairview Microwave introduces a new series of rugged, portable, phase stable RF analyzer cable assemblies ideal for handheld network analyzers, base station analyzers, portable spectrum analyzers, field testing, tower measurements, distance-to-fault measurement, and site maintenance applications. These 19 analyzers deliver excellent amplitude, phase stability with flexure, and operate at a maximum of 27 GHz.