RF Military Electronics Featured Datasheets

81. Datasheet: Compact Opto-Electronic Oscillator (C-OEO) 10/5/2009
    The OEwaves Compact OEO offers extremely low phase noise, low vibration and acceleration sensitivity for signal source modules required in high-frequency and high performance applications. Its unique design, based on microwave photonics, delivers a level of performance that will enable increased capabilities for phase noise measurements, military radar system visibility, channel capacity of communications systems, and future wireless communications systems.
82. Datasheet: RF/Microwave Configurable Switching Chassis - 8300 And 8400 Series 10/2/2009
    Giga-tronics recently introduced the Model 8300 and Model 8400 switching chassis’ for its ASCOR switch products optimized for integration into Automated Test Equipment (ATE). With these two new models, test engineers and managers gain access to more than 30 years of signal switching experience and tailored switching solutions for ATE.
83. Datasheet: Wideband Power Amplifier: 50W, 20 To 520 MHz - RWM03060-10 9/30/2009
    The RWM03060-10 wideband power amplifier has a minimum 46dB gain & minimum 46dBm P3dB over 20 to 520 MHz. The hybrid amplifiers are compatible with analog, digital, and video waveforms used in ground to ground, ground to air, satellite communications and direct video broadcasting applications. The amplifier includes thermal overload and input power overdrive protection, external voltage variable attenuator port and current monitoring port.
84. Product Overview: Waveguide Switches 9/23/2009
    All of Dow Key’s line of Waveguide Switches have an operating voltage of 28 Vdc (24-30 Vdc) and feature an operating temperature of – 54 Degrees C to + 84 Degrees C, and a 200,000 mechanical life cycle minimum. They all can be used in commercial and military applications, while the 3 or 4 port and Waveguide Transfer/SPDT are optimized for commercial, military, avionics, and space applications.
85. Datasheet: Solid State Switching System: 5144 9/23/2009
    The 5144 Model RF Switching System is a Solid State Matrix. To compensate for system insertion loss, all inputs are outfitted with high linearity amplifiers. Designed for signal routing this unit can also be used as a building block for ATE applications.
86. Datasheet: High-Powered, Pole Placed VHF Bandpass Filter, SMT 9/21/2009

    These pole placed 8 section surface mount high-powered bandpass filters are ideal for UHF Military Radio Applications. They can be supplied as RoHS compliant or with lead based solder. Availability for the Bandpass filters is immediate. They features small size, low loss, and high isolation.

87. Datasheet: High-Powered, Pole Placed, Discrete Low Loss UHF Bandpass Filter, SMT 9/21/2009
    These pole placed 8 section surface mount high-powered bandpass filters are ideal for UHF Military Radio Applications. They can be supplied as RoHS compliant or with lead based solder. Availability for the Bandpass filters is immediate. They features small size, low loss, and high isolation.
88. Product Overview: Bandpass Filters 9/15/2009
    Anatech Electronics Bandpass filters covers the frequency range from 300 KHz to 20 GHz. These bandpass filters are available with 2 to 15 sections, with bandwidths from 1% to 100%. The common response type are Chebyshev, Butterworth, and Elliptic. Other reponse type are also used depending on the requirement.
89. Datasheet: High Power Switches 9/11/2009
    The ACC series of high-power T/R diode switches span the frequency range of 5 MHz to 6 GHz and are available with absorptive output on the RX port and reflective port on the TX side.
90. Datasheet: Directional Coupler, 0.4 To 4.0 GHz: 100404010 And 100404020 9/8/2009

    Krytar offers Model 100404010 & 100404020 Directional Couplers...