Matrix Switches Products

  1. Matrix Switch System
    11/9/2006
    CrossPoint Technologie's MS-4001-32X32-HF-HIA is a Switch Matrix System covering the HF frequency band of 1.5 – 32 MHz. This system provides 32 X 32 non-blocking switching and distribution where any of the 32 inputs can be routed to one or all 32 outputs simultaneously...
  2. Wireless Network Surveillance System
    11/8/2017

    The new wireless network surveillance system from Corry Micronics comprises the RFMS-2x8*8 8 Channel Matrix with a Probe Port and two CMIATT-4CH-200W 100 W Attenuator banks. It is capable of a range of configurations ranging from one port to over 48 ports. The 8-channel RF matrix switch is designed with a probe/test port where the signal analysis occurs. The 8-channel switch is bi-directional enabling testing in both directions. System frequencies can be customized to the end user’s specifications.

  3. 50 Ohm Full Fan-Out Switch Matrix With Ethernet, GPIB, RS-232, RS-485 and CANbus Interfaces
    5/10/2007
    Dow-Key Microwave offers a CANbus-based Coaxial Switch Matrix system with Ethernet, GPIB, RS-232, RS-485, and CANbus control interfaces. The system performs from 300 MHz to 1 GHz and is configured as an 8X8 Full Fan-Out Switch Matrix
  4. Reconfigurable RF Switch Matrix: FlexMatrix
    8/23/2012

    The FlexMatrix reconfigurable RF switch matrix allows test engineers that work in radar, consumer wireless, and military communications applications to easily adjust, modify, or expand their RF switching capabilities.

  5. Non-Blocking RF Switch Matrix
    4/15/2015

    A non-blocking RF switch matrix is more complex than the blocking type, but it’s also more flexible. In this configuration, an input can be switched to multiple outputs. One input can in fact be switched to all of the outputs at once. This provides an extra degree of flexibility compared to the blocking architecture. However, a non-blocking architecture still has the limitation of not allowing two or more inputs to be switched to the same output. Input 1 for example can be simultaneously switched to every output or selectively switched to several outputs at once, but no other input can be switched to any of the same outputs.

  6. Overview of Dow-Key’s Electromechanical Matrix Capabilities
    12/12/2006
    Dow-Key provides electro-mechanical switch matrices in an array of configurations
  7. 1U Electromechanical Switch Matrix with Ethernet, GPIB, RS-232, RS-485, and CANbus Interfaces
    5/10/2007
    Dow-Key Microwave offers a CANbus-based Coaxial Switch Matrix system with Ethernet, GPIB, RS-232, RS-485, and CANbus control interfaces. This matrix performs up to 18 GHz and can be configured with up to four SP10T switch assemblies
  8. 1 To 18 GHz Fan-Out CANbus-Based Switch Matrix with Ethernet Interface
    5/10/2007
    Dow-Key Microwave’s CANbus-based Coaxial Switch Matrix System with Ethernet control interface, performs from 1 to 18 GHz and is configured as an 8X8 full fan-out Switch Matrix
  9. 64 x 64 L-Band Hurricane Matrix
    2/25/2016

    ETL Systems presents the new 64 x 64 L-Band Hurricane Matrix customized to meet exact RX chain requirements for applications within the 850-2450 MHz frequency range. The unique design allows for the selection of input modules that exactly match teleport or broadcaster requirements. Each input port can be tailored with its own modules including fiber L-band input, LNB powering, variable gain / slope compensation, and RF level detection.

  10. Miniature Multiple Switch Matrix: MS Series
    5/29/2012

    The Miniature MS-series Matrix is equipped with high performance Reliant Switches™ with 0.03 dB insertion loss repeatability across the DC to 26.5 GHz frequency range, and is ideal for test and measurement applications. The small sized enclosure can be populated on the front panel with a maximum of 8 SPDT switches, 2 SP6T switches, 1 SP6T + 4 SPDT switches, or 2 SP6T + 1 SPDT switches.