Matrix Switches Products

  1. Reconfigurable RF Switch Matrix: FlexMatrix
    8/23/2012

    The FlexMatrix reconfigurable RF switch matrix allows test engineers that work in radar, consumer wireless, and military communications applications to easily adjust, modify, or expand their RF switching capabilities.

  2. Matrix And Multifunction Switches
    8/4/2009
    Dow-Key Microwave, a leader in the design and manufacture of switching products, acquired its Matrix line in 1999. Since that time, the line has expanded to include both standard and custom matrices supporting the aerospace, military and communication industries for both signal routing and ATE applications.
  3. Crossbar Matrix Switch System: CB-Series
    5/29/2012

    The CB-Series by Dow-Key Microwave is a crossbar matrix switch system that allows any input to be connected to any output, making it an ideal switch solution for complex test setups and signal routing.

  4. Wireless Network Surveillance System
    11/8/2017

    The new wireless network surveillance system from Corry Micronics comprises the RFMS-2x8*8 8 Channel Matrix with a Probe Port and two CMIATT-4CH-200W 100 W Attenuator banks. It is capable of a range of configurations ranging from one port to over 48 ports. The 8-channel RF matrix switch is designed with a probe/test port where the signal analysis occurs. The 8-channel switch is bi-directional enabling testing in both directions. System frequencies can be customized to the end user’s specifications.

  5. 1U Electromechanical Switch Matrix with Ethernet, GPIB, RS-232, RS-485, and CANbus Interfaces
    5/10/2007
    Dow-Key Microwave offers a CANbus-based Coaxial Switch Matrix system with Ethernet, GPIB, RS-232, RS-485, and CANbus control interfaces. This matrix performs up to 18 GHz and can be configured with up to four SP10T switch assemblies
  6. 1 To 18 GHz Fan-Out CANbus-Based Switch Matrix with Ethernet Interface
    5/10/2007
    Dow-Key Microwave’s CANbus-based Coaxial Switch Matrix System with Ethernet control interface, performs from 1 to 18 GHz and is configured as an 8X8 full fan-out Switch Matrix
  7. Super Non-Blocking Switch Matrix
    5/5/2015

    A super non-blocking switch matrix has the most flexible architecture, yet most complex when compared to blocking and non-blocking types.  In this configuration any input can be switched to any and all outputs.  In addition to this, multiple inputs can be routed to the same output.  Input 1, for example, can be simultaneously switched to every output or selectively switched to several outputs at once. Input 2 can also be simultaneously switched to every output or selectively switched to several outputs at once, regardless of how Input 1 (or any other input) is routed.  The same is true for all of the remaining inputs.

  8. 50 Ohm Full Fan-Out Switch Matrix With Ethernet, GPIB, RS-232, RS-485 and CANbus Interfaces
    5/10/2007
    Dow-Key Microwave offers a CANbus-based Coaxial Switch Matrix system with Ethernet, GPIB, RS-232, RS-485, and CANbus control interfaces. The system performs from 300 MHz to 1 GHz and is configured as an 8X8 Full Fan-Out Switch Matrix
  9. 64 x 64 L-Band Hurricane Matrix
    2/25/2016

    ETL Systems presents the new 64 x 64 L-Band Hurricane Matrix customized to meet exact RX chain requirements for applications within the 850-2450 MHz frequency range. The unique design allows for the selection of input modules that exactly match teleport or broadcaster requirements. Each input port can be tailored with its own modules including fiber L-band input, LNB powering, variable gain / slope compensation, and RF level detection.

  10. Blocking RF Switch Matrix
    4/16/2015

    A blocking RF switch matrix can achieve high levels of isolation and lower levels of insertion loss because of their internal switches (which exhibit high isolation and low loss characteristics). They’re the simplest type of available RF switch matrix configurations.