Ultra-Low Noise Figure Amplifiers With 0.3 dB Typical Noise Figure
Ciao Wireless introduces its new line of Ultra-Low Noise Amplifiers with Noise Figures as low as 0.30 dB typical between 1.0 – 2.9 GHz with delivery in 1-2 WEEKS ARO.
40 MHz – 1 GHz Broadband CATV Low-Noise Amplifiers
Skyworks introduces two new broadband, 75 Ohm MMIC front-end, low-noise amplifiers (LNAs). The SKY65452-92LF and the SKY65450-92LF (with bypass mode) provide high linearity and excellent gain over a wide frequency range of 40 MHz to 1 GHz with minimal external components. In addition, these LNAs offer low current consumption, low noise figure, and deliver energy-saving features.
Low-Noise Amplifier Modules For Cellular Infrastructure Applications: ALM-11x36
The new ALM-11x36 Low-Noise Amplifier Modules for Cellular Infrastructure Applications deliver best-in-class noise performance and high linearity with a compact package. The modules can replace large discrete and surface-mount component counts in conventional designs, shortening design cycle time and providing board space savings.
700 - 1100MHz Low Noise, High Gain, High Linearity Balanced Amplifier Module: ALM-1522
ALM-1522 is a low noise, high gain and high linearity balanced amplifier module operating in the 700MHz to 1100MHz frequency range. The exceptional noise and linearity performances are achieved through the use of Avago Technologies' proprietary 0.25um GaAs Enhancement-mode pHEMT process.
Ultra Low Noise, High Linearity Active Bias Low Noise Amplifier: MGA-633P8
The Ultra Low Noise, High Linearity Active Bias Low Noise Amplifier: MGA-633P8 is the latest addition to the Avago Technologies family of ultra low noise, high gain, high linearity Gallium Arsenide (GaAs) Active Bias Low Noise Amplifiers (LNA). The device provides Best In Class NF (0.38dB @ 900MHz) performance and is designed to be used as first stage LNA within cellular base station transceiver radio cards, tower mounted amplifiers (TMA), combiners, repeaters and remote/digital radio heads.
SiGe: C Low Noise Amplifiers (LNAs)
NXP Semiconductors has released new low noise amplifiers with the ability to dynamically suppress strong transmit signals. These LNAs improve GPS signal reception, linearity, and noise figure.
Pre-Filtered GPS LNA
The 312 Series of pre-filtered GPS LNAs (low noise amplifiers) features a low noise figure, a wide input voltage range, compliance with many MIL-STD-810 and MIL-STD-461 requirements, and more. The LNAs come in a small, lightweight hermetically sealed package.
Low-Noise Amplifier With Bypass Mode In Low Profile Package - MGA-655T6
Avago Technologies' MGA-655T6 is an economical easy-to-use GaAs MMIC Low Noise
Amplifier (LNA) with Bypass mode. The Bypass mode enables the LNA to be bypassed during high input signal power and reduce current consumption. Its housed in a low profile 2 x 1.3 x 0.4mm 6-pin Ultra Thin Package.
4-8 GHz Low Noise Amplifier
This LNA features an ultra-low noise figure, a single supply voltage of +4.0 V @ 75 mA, and high gain broadband performance. It comes in a Pb-free RoHs compliant 3x3 QFN package and is ideal for applications involving test instrumentation, point-to-point radios, point-to-multipoint radios, and military end-use.
Ultra-Low-Noise Flat Gain LNA: TQL9092
The TQL9092 from Qorvo is a flat-gain, high-linearity, ultra-low-noise amplifier (LNA) optimized for the 0.6 – 4.2 GHz frequency range, but can operate as low as 600 MHz. This LNA provides a gain flatness of 2 dB over a bandwidth range of 1.5 to 3.6 GHz, and can be biased from a positive supply that ranges from 3.3 to 5 volts.