Diplexers & Duplexers Products and Services
-
2KCZ30-00002/-00003 - Cellular/PCS Diplexer
11/13/2006
- Highpass/Lowpass Diplexer
- Low Passband Insertion Loss
- Dual Band AMPS/PCS Coverage
-
AMPS Microcell Duplexer
11/30/2006
Narda West’s Amps Band Microcell Duplexer provides highly selective receive/transmit combining
-
High-Power And Broadband Matched Band-Pass/Band-Stop Diplexers
8/14/2007
High-Power And Broadband Matched Band-Pass/Band-Stop Diplexers from K&L Microwave...
-
Connectorized Ceramic Diplexers and Multiplexers
3/17/2015
Ceramic diplexers and multiplexers offer performance benefits that fall between Cavity and Lumped element diplexer capabilities and characteristics. Most often, they’re used because of a system’s size constraints. Ceramic diplexers are offered as non-hermetic surface mount designs or in hermetic housings with connectors.
-
Diplexers/Multiplexers with Reduced Prototyping
2/27/2015
Diplexers and multiplexers are used to either separate or combine two different frequencies that are similar in range to one another. While bandpass filters can also be used to combine and separate signals, they’re only ideal for use with frequencies that are far apart from one another.
-
AMPS Band Isolation Duplexer
11/30/2006
Narda West’s AMPS Band High Isolation Duplexer provides highly selective receive/transmit combining
-
High Performance AWS Diplexer
7/23/2008
This diplexer model has been designed for applications that require a high level of TX-RX isolation. It has a temperature range of -20 to +85°C and a maximum VSWR of 1.5:1.
-
Cavity Bandpass Filters & Duplexers
3/26/2008
Anatech Electronics manufactures standard and custom Cavity Bandpass Filters & Duplexers/Diplexers from 0.1 MHz – 20 GHz.
-
WCS/MMDS Air Cavity Diplexer
2/23/2006
This diplexer uses TE Mode waveguide puck resonators to achieve narrowband filters of less than 0.25% bandwidth yet still provide a pass band loss on the order of < 1.5 dB. In addition to the low loss provided by the high Q ceramic resonators, cross coupling is used to achieve very deep rejection of 75 dBc at a 4:1 shape factor. This device also incorporates a sampling coupler and is available in both diplexer and double band pass configurations in frequency ranges of 2250 MHz to 2800 MHz...
-
WiMAX/WiFi Low Cost Diplexer
3/4/2009
Microlab/FXR, a wholly owned subsidiary of Wireless Telecom Group, Inc., provides a low cost Diplexer, to separate or combine all the cellular wireless frequency bands from the WiMAX and WiFi bands above 3 GHz.