Diplexers & Duplexers Products and Services
-
WiMax Duplexer
2/1/2012
This cavity duplexer for WiMax applications features a small form factor, low insertion loss, high channel selectivity, high isolation, with both custom and standard designs available. Its low channel center frequency runs from 3400 to 3500 MHz, and its high channel center frequency runs from 3500 to 3600 MHz. This WiMax Duplexer’s operating temperature runs from -40 °C to +90 °C, has SMA female connectors, has 100 MHz channel separation, 40MHz channel bandwidth, 1.5 dB max passband insertion loss, and 16 dB min passband return loss.
-
AMPS Band Isolation Duplexer
11/30/2006
Narda West’s AMPS Band High Isolation Duplexer provides highly selective receive/transmit combining
-
MM Wave Diplexer For Point-To-Point Radio
1/4/2007
K & L Microwave’s 8WZ01-62.3/58.7/U1.4-V/V is a waveguide diplexer, specifically designed to diplex two relatively narrow band widths for point-to-point transceiver. Each band pass filter is passing 1.4 GHz respectively
-
Ultra Compact L/S Band Filter Diplexer for UAV Communication
11/13/2013
The MtronPTI LF9422 L/S Band LC Filter Diplexer is custom designed for small form factor UAV-ISR platforms. Unlike open frame designs, the 1” x 1” wash-proof surface mount package is sealed, allowing automated assembly with no drift after board cleaning.
-
W-CDMA Duplexer (856450)
1/25/2009
W-CDMA Duplexer (856450).
-
400-500 MHz Ruggedized Cavity Diplexer
1/20/2012
This cavity diplexer features a compact size, a ruggedized package for Hi-Rel environments, high isolation and small separation between channels, and more. It operates in the 400-500 MHz frequency range and is ideal for airborne, ship, or vehicle mount applications in military environments.
-
3KCZ70-80/X3170 - Surface Mount Terminated Diplexer
12/14/2006
Features: Low Profile, Surface Mountable, Withstands Reflow Temperatures
-
ESMR Duplexer - WSD-00420
4/12/2006
K&L’s WSD-00420 ESMR duplexer is reaching thresholds of this technology with it’s extreme low insertion loss and tight rejection at 861.5 MHz this filter has been optimized for performance and cost
-
11 Pole EGSM Drop-In Diplexer
2/23/2006
The 11DCR8C-898/943/C40-D is a very high-performance EGSM diplexer in a drop-in package. The high-Q ceramic and double cross-coupled design achieves a high level of selectivity and channel isolation while maintaining excellent passband characteristics in applications where the frequencies of the channels are very close. Measuring approximately 3.5” long by 0.33” wide by 0.641” high this mass-producible diplexer can give you an edge in your high-performance application...
-
Cavity Duplexer/Combiner DB5248
8/7/2008
Anatech provides ceramic and cavity filters for INMARSAT communication applications