Products and Services

  1. 500 Watts CW Solid-State Amplifier: 500W1000B
    7/1/2013

    This solid-state amplifier covers the 80 MHz to 1000 MHz frequency range and uses push-pull circuitry in its higher power stages in order to lower distortion and improve stability. It’s particularly well suited for applications that require an amplifier with high gain and instantaneous bandwidth.

  2. Next Generation 1 kW Broadband Amplifier Family
    5/31/2012

    Empower RF’s family of next generation 1 kW broadband amplifiers are compact and LDMOS based. Three different models are available. Model 2126 operates in the 20 to 500 MHz frequency range. Model 2066 covers 500 to 1000 MHz. Model 2162 operates in the 20 to 1000 MHz frequency range.

  3. dB-4409 Dual Band TWT Amplifier
    1/25/2012

    The dB-4409 is a 9-inch, pod-mounted, dual-band Traveling Wave Tube Amplifier (TWTA) operating in the 2 to 18 GHz frequency range and providing 300 Watts, continuous wave power.

  4. Broadband Amplifier Systems: 7000 Series
    10/15/2012

    Ophir RF’s 7000 series consists of ten different broadband amplifier systems covering a wide frequency range. Each model features variations in output power, harmonics, spurious signal parameters, and more. These amplifiers are ideal for both military and commercial applications.

  5. Model NP-507: Broadband Linear RF Amplifier
    6/16/2008
    Designed for linear application in the 10 to 1000 MHz range. This amplifier utilizes RF Power MOSFET devices that provide high gain, wide dynamic range and an excellent 3rd order intercept point. Suggested applications: multi-carrier, pulse, AM & FM modulation.
  6. Broadband RF Power Amplifier: 5 MHz to 1000 MHz
    10/15/2012

    The 5322 broadband RF power amplifier is small, lightweight, and designed for lab environments. It operates in the 5 to 1000 MHz frequency range and has a 15 W (typ) saturated output power. This amplifier has a +43 dB (min) small signal gain, +45 dBm (typ) IP3, -20 dBc (typ) harmonics @ 5 watts, and <-60 dBc (typ) spurious signals @ 5 watts. Additional specifications can be found on the available datasheet.

  7. 1 to 2.5 GHz High Power Amplifier In 8U Chassis
    10/16/2015

    The new Model 2180 from Empower RF is a high power RF amplifier system designed to cover the 1 to 2.5 GHz frequency range, and deliver 2 kW CW of broadband output power in an 8U, air cooled  chassis. The amplifier features unrivaled size, weight, and power advantages for many test and measurement, electronic warfare, and communication applications.

  8. Broadband Bench Top Amplifiers 0.1 - 40.0 GHz
    3/16/2012
    Microsemi RFIS has designed a range of bench top amplifiers that operate in the 0.1 – 40.0 GHz frequency range, and are ideal for production test and laboratory applications. This page covers the AML0126P3002-BT.
  9. Class A Broadband Amplifier: CBA 100M-400
    7/18/2012

    This Class A design of this broadband amplifier results in a system with high reliability and low distortion linear performance across the frequency range. It also ensures that the CBA-100M-400 Broadband Amplifier will continuously operate at full power, even when presented with an open or short circuit as its output.

  10. Solid State Broadband High Power Amplifier: 1163-BBM2E3KLO
    11/1/2012

    This solid state broadband high power amplifier operates in the 20-520 MHz frequency range and delivers 125 Watts output power. It’s suitable to use as a broadband PA building block in applications involving electronic attack, digital communications, and test and measurement in the UHF/VHF bands.