The AMM-6702SM is a surface-mount LO driver amplifier that is designed to provide sufficient LO drive for an H diode mixer such as the MM1-1850HSM or MM1-1850SSM across temperatures with input power from 0-10 dBm.
The VKX-8311A is a pulsed klystron operating at 11.994 GHz, 50 MW peak, 5 kW average power. It is electromagnet-focused and liquid-cooled with a waveguide output of WR-90 and vacuum flange.
The Direct Energy Symposium will serve as a forum to promote discussions on the most recent developments of directed energy (DE) systems and technologies in support of U.S. national security and civil application. Esteemed leaders within the U.S. government, military services, DoD, academia, and research labs will convene to share latest projects, foster open communication, and support the next generation of directed energy technologies.
Wilkinson dividers (3 dB per split) incorporate our low loss, high permittivity dielectric materials to provide small size and temperature stability. The devices integrate thin film precision resistors and are offered for both solder surface mount (SMT) and chip and wire hybrid (WB) assembly applications.
Expanding the range and delivering reliable communications with the latest tactical radio systems is now easier than ever with AR Modular RF's line of fast switching amplifiers.
WaveFarer is a high-fidelity radar simulator that accounts for multipath and scattering from structures and vehicles in the immediate environment of a radar system as well as key atmospheric and scattering effects for frequencies up to and beyond 100 GHz.
Si834x devices provide up to four isolated high- or low-side switches with low "ON" state switch resistance. Si834x switches are ideal for driving resistive and inductive loads including solenoids, relays, and lamps commonly found in industrial control systems.
The new KRYTAR 4×4 Butler Matrix uses KRYTAR’s high-performance 90- and 180-degree hybrid couplers, providing super phase accuracy, amplitude imbalance, stability, and repeatability.
The Model KAW2100-M2 is a Class AB linear RF power amplifier delivering in excess of 200 watts into a 50-ohm load over the frequency range of 200 MHz to 500 MHz.
The L40 Series DPDT RF switch with mounting bracket and 2.92 mm connectors is available in the failsafe or latching configuration at 12 Vdc, 15 Vdc, 24 Vdc, or 28 Vdc. TTL logic allows for a 5 Vdc operation.
Model 50PA-1249-XX is a 19-inch rack mount attenuator assembly containing 50 ohm solid-state step attenuators. The number of attenuators can be selected from one to eight attenuators.
The AMP2033LC from Exodus Advanced Communications is a solid-state, high-power amplifier designed for use in broadband EMI/RFI, lab, communications, and EW applications operating in the 6.0 – 18.0 GHz frequency range.
The PAM-1840VH broadband preamplifier is an excellent choice for improving system dynamic range. This preamplifier will increase your system sensitivity by at least 30 dB and is ideal for low-amplitude test measurements.
An excellent alternative to traveling wave tube amplifiers, Qorvo’s Spatium QPB2040N is a solid-state, spatial combining amplifier with an operating range of 18 – 40 GHz.
The Holzworth HX3100 Phase Detector was designed for making phase noise measurements and to be used in analog phase locked loops where performance is a priority.
The R&S CMP200 is an IF tester that combines vector signal analyzer and ARB-based generator functionality. The compact integrated solution can be customized with up to three R&S CMPHEAD30 remote radio heads (RRH).
The VMS1197B magnetron is a high-power microwave oscillator in which the potential energy of an electron cloud near the cathode is converted into RF energy in a series of cavity resonators.
The Model 125W1000A is a solid-state, Class A design, self-contained, air-cooled, broadband power amplifier designed for applications where instantaneous bandwidth, high gain, and linearity are required.
