Products and Services

  1. L-Band Variable Gain Amplifiers
    7/30/2015

    ETL Systems offers a series of Variable Gain Amplifiers operating in the L-band (850-2150 MHz). These amplifiers have 0 to 30 dB gain settable in 1 dB gain steps with a built in regulator. Model options are available with end-to-end connectors or connectors on the same face, and are either in-line powered or externally powered. Field applications for these devices include telecom infrastructures, satellite systems, microwave links, test and instrumentation, military communications, and radar networks.

  2. 0.25W Analog Variable Gain Amplifier: ALM-80110
    12/2/2009
    The device provides an exceptionally high OIP3 level which is maintained over a wide attenuation range.
  3. Variable Gain Amplifier - 300 To 2700 MHz
    10/3/2005
    The MPS-032701A-82 variable gain amplifer is an internally matched GaAs FET amplifier in a surface mount ceramic package. This variable gain amplifier is ideal for digital communications applications where excellent gain linearity and high efficiency at a 5 Volt bias is required...
  4. L-Band Fixed-Gain Amplifiers: A-GABL1-33XX
    7/24/2015

    ETL Systems offers a series of fixed-gain tubular amplifiers with 10, 15, 20, 25 or 30 dB gain that operate in the L-band (850-2150 MHz). These amplifiers are available in DC pass biased from either RF port, DC block biased from output port, 10 MHz and DC pass biased from either RF port, DC blocked biased from input port, 10 MHz and DC block biased from output port, or 10 MHz and DC block from input port. Typical field applications for these devices include telecom infrastructures, satellite systems, microwave links, test and instrumentation, military communications, and radar networks.

    For more information on the different specifications and RF parameters, download the available datasheets.

  5. 0.25W Analog Variable Gain Amplifier: ALM-80210
    12/1/2009
    ALM-80210 is a 0.25W Analog Controlled Variable Gain Amplifier which operates from 1.6 GHz to 2.7 GHz.
  6. 0.5-18 GHz Variable Gain Amplifier In WaferCap SMT Package: VMMK-3503
    12/1/2011
    The VMMK-3503 .5-18 GHz Variable Gain Amplifier in WaferCap SMT Package is ideal for 2.4, 3.5, and 5-6 GHz WLAN and WiMax, 802.16 & 802.20 BWA systems, Radar and ECM systems, UWB, and generic IF amplifier and VGA applications.
  7. Variable Gain High Linearity, Low Noise Amplifier: RFLA1018
    9/9/2011
    RFMD's RFLA1018 is an analog-controlled voltage-variable gain amplifier featuring high linearity and very low noise figure. This LNA with bypass mode and variable attenuator provides over 35dB of dynamic gain range. The RFLA1018 has a 3.3V control range with maximum gain at 0V. The LNA is temperature compensated to reduce gain variation. A noise figure of 0.65dB and an IIP3 of 2dBm make this component ideal for receiver input lineups. The RFLA1018 is packaged in a small 8.0mm x 8.0mm leadless laminate MCM. This module is internally matched to 50Ω on all RF ports, making it easy to use with no external matching components required.
  8. AVG Series - Variable Gain Amplifiers
    9/1/2003
    FEATURES
    • Gain can be adjusted continuously (0–15 dB) by applying a DC control voltage to the control pin with an external resistor in series (x 470 ohms)
  9. Digital Controlled Variable Gain Amplifier 2000MHz To 2800MHz: RFDA2046
    8/4/2011
    RFMD’s RFDA2046 is a digital controlled variable gain amplifier featuring high linearity over the entire gain control range with noise figure less than 5.2dB in its maximum gain state. The gain of the 6-bit digital step attenuator is programmed with a serial mode control interface (SPI). The RFDA2046 is packaged in a small 6.0mm x 6.0mm leadless laminate MCM, which contains plated through thermal vias for ultra-low thermal resistance. This module is easy to use with no external matching components required.
  10. Digital Controlled Variable Gain Amplifier 10MHZ To 850MHZ: RFDA0045
    10/3/2011
    RFMD’s RFDS0045 is a Digital Controlled Variable Gain Amplifier operating in the 10MHZ to 850MHZ frequency range. It features SPI serial control programming, a max gain of 44dB at 150MHz, a gain control range of 31.5dB (0.5dB Step Size), high OIP3 of 42dBm at 150MHz, high P1dB = 20dBm at 150MHz, a single +5V supply, a small 32-Pin, 5.2mm x 5.2mm MCM, a footprint compatible with 5mm x 5mm, 32-Pin QFN, and power-up programming. This amplifier is ideal for Transceiver IF DVA, Cellular, PCS, GSM, UMTS, Wireless Data, and Satellite Terminal applications.