Products and Services

  1. UHF RF Data Transceiver: RF-U-3545-TR-2
    6/14/2012

    This UHF RF Data Transceiver operates in the 350 to 450 MHz frequency range, has a data rate up to 80 kbps, a 500 mA (@15.0 VDC) transmit current, a 135 mA (typical) receive current, -98 dBm (typical) sensitivity, an RF transmit power of 100 mW (typical), and more.  The RF-U-3545-TR-2 UHF RF Data Transceiver measures in at 9.10” x 3.26” x 0.57”. Custom designs changes in size, data rates, frequencies, modulations, RF power output, etc. are available.

  2. Ka-Band Silicon Transceiver Quad Core IC: AWMF-0108
    5/16/2016

    Anokiwave presents the AWMF-0108 highly integrated silicon quad core chip that is designed specifically for 5G phased array applications. This device functions within the 27.5 – 30 GHz frequency range, and operates in half duplex fashion, which enables a single antenna to support both Tx and Rx operation by supporting four Tx/Rx radiating elements.

  3. 76 GHz Transceiver
    2/2/2012
    This Frequency Modulated Continuous-Wave (FMCW) Radar transceiver is antenna mounted and operates at 76Ghz. This particular transceiver has been designed for high volume, low cost manufacturing. Because FMCW radars are short-range- this transceiver will most likely be used in commercial applications involving security, radar sensors for vehicles for backup aid or side object detection.
  4. 3 GHz RF Analog Fiber Optic Transceiver OFW-2320TRX
    3/22/2012
    This RF analog fiber optic transceiver is ideal for the long-haul transmission of RF signals over singlemode fiber optic cable in the 100 MHz to 2500 MHz frequency range.
  5. RF Transceiver With Low-Power Requirements: ZL70250
    3/16/2012
    The low power requirements of this RF transceiver make it ideal for applications involving wireless sensors, remote controls, voice communications, and short range communications with long battery life. Battery powered applications in body area networks, and applications that rely on energy harvesting are also a good fit.
  6. VHF Data Transceiver: RF-V-47-TR
    6/13/2012

    This VHF Data Transceiver operates in the 46.00 to 47.00 MHz frequency range and has an RF output power of >100mW. However, its unique architecture allows the transceiver to be modified to support other frequency ranges and RF output power requirements.

  7. 6 GHz RF Vector Signal Transceiver: NI PXIe-5644R
    8/9/2012

    Vector Signal Transceivers combine a vector signal generator and a vector signal analyzer with FPGA based real time signal processing and control. The NI PXIe-5644R RF Vector Signal Transceiver from National Instruments offers operation in the 65 MHz to 6 GHz frequency range, 80 MHz instantaneous bandwidth, and 24 channels of high speed digital I/O up to 250 Mbit/s. It’s used to test wireless and cellular standards.

  8. SATCOM Transceivers & Up/Down Converters: Series 80000 & 85000
    2/17/2011
    Narda East’s SATCOM Transceivers & Up/Down Converters are small and light weight. The 80000 and 85000 series both feature low power consumption, and a high dynamic range receiver.
  9. 2x2 RF Agile Transceiver: AD9361
    4/16/2014

    Because of its programmability and wideband capability, the AD9361 RF agile transceiver by Analog Devices is particularly ideal for point-to-point communication systems, femtocell/picocell/microcell base stations, and in general-purpose radio systems. The device covers the 70 MHz to 6.0 GHz range and is comprised of integrated frequency synthesizers and an RF front end.

  10. ML5805 - Variable Data Rate FSK Transceiver With PA
    2/3/2009
    The RFMD ML5805 is a single chip, fully integrated frequency shift keyed (FSK) transceiver developed for a variety of applications operating in the 5.725 GHz to 5.850 GHz unlicensed ISM Band. The ML5805 is mode-selectable for operation with digital cordless phones (DSSS or DECT) and higher data rate streaming applications such as wireless audio and video.