Test And Measurement Products
-
K Band Motion Sensor Modules: SSM Series
4/6/2013
These motion sensor modules are short range Doppler sensors that operate in the K band. They’re ideal for traffic radar systems, automatic door openers, dual mode security systems, and automatic production lines.
-
Millimeter Wave Hybrid Tees and Tuners: EHT/HBT Series
9/6/2012
Millitech’s line of millimeter wave Hybrid Tees and E- and H- Plane Tuners are ideal for applications involving test and instrumentation, power division/combining, and impedance matching. They operate in the 26.5 to 220 GHz frequency range, are convenient to use, and feature low insertion loss.
-
ShockLine™ Compact USB Vector Network Analyzer: MS46122B
11/23/2014
The MS46122B is a series of three PC-controlled Compact ShockLine Vector Network Analyzers with a frequency range from 1 MHz to 8/20/43.5 GHz. The series benefits from patented ShockLine VNA-on-chip technology, which simplifies the internal VNA architecture at high frequencies, reduces instrument cost, and enhances accuracy and measurement repeatability.
All the members of the MS46122B series are low cost full-reversing 2-port VNAs aimed at RF and microwave applications in manufacturing, engineering and education. All three MS46122B VNAs have 220 microseconds per point sweep speed and better than 100 dB dynamic range making them suitable for a variety of device test applications.
-
RF And Microwave Safety Monitor: Nardalert S3
2/15/2011
Narda Safety Test Solutions, an L-3 Communications (NYSE: LLL) company introduces the Nardalert S3 RF and Microwave safety monitor; the world’s most accurate, versatile non-ionizing radiation (NIR) monitor for wearable and fixed-area monitoring applications. The Nardalert S3 detects electromagnetic (EM) radiation levels from 100 kHz to 50 GHz, and is the successor to the Nardalert XT, the industry-standard in wearable NIR monitors used by more commercial, aerospace and defense, and industrial organizations than all other instruments combined.
-
10 MHz To 6200 MHz Signal Analyzer APPH6000
3/30/2012
Anapico’s 10 MHz to 6200 MHz Signal Analyzer is ideal for applications involving supply noise verification, crystal oscillator and VCO testing, automated production testing, PLL synthesizer locking and characterization, and general purpose phase noise tests.
-
Synthesizers
8/18/2009
Microsemi-RFIS offers a variety of frequency synthesizers designed for applications where small step size, low phase-noise, broad tuning range, and low power consumption are required. These products are designed to meet the demanding requirements of field portable SatCom terminals, control links for UAVs, and test/measurement applications.
-
Impedance Meter
12/21/1999
An impedance meter has been released to measure the impedance of lines from 5 to 100 kW
-
Spectrum and Signal Analyzer for Satellite Communications: NRA-2500
2/27/2014
The NRA-2500 covers the 5 MHz to 2.5 GHz frequency range and is ideal for use as a starter model for satellite monitoring and control systems. It’s optimized for use in D-SNG vehicles, teleports, and in maritime applications.
-
Microwave USB Power Sensor (MA24105A)
12/2/2011
The Anritsu MA24105A Inline Peak Power Sensor is designed to take accurate average power measurements from 2 mW to 150 W and peak power measurements from 2 W to 300 W over the frequency range of 350 MHz to 4 GHz. The sensor employs a “dual path” architecture that enables True-RMS measurements over the entire frequency and dynamic range allowing users to measure CW, multi-tone and digitally modulated signals such as LTE, LTE-TDD, GSM/EDGE, CDMA, W-CDMA, WiMAX, TD-SCDMA, WLAN, and LTE. The forward direction path also include a 4 MHz bandwidth channel that has peak and comparator/integrator circuits that add measurement functions such as PEP power, crest factor, CCDF, and burst average power. Another detection circuit on the reverse direction adds reverse power measurement capabilities including reverse power, reflection coefficient (magnitude), return-loss, and SWR. The presence of a micro-controller along with signal conditioning circuitry, ADC, and power supply in the sensor makes it a complete miniature power meter.
-
Spectrum Analyzer: BB60A
2/20/2014
Signal Hound’s BB60A combines a real-time spectrum analyzer and an RF recorder in a 7.63” x 3.19” x 1.19” package. This page will focus on the spectral analysis function of the device.