Hot Products

  1. Antenna Test System: R&S®ATS1000
    5/20/2019

    The R&S®ATS1000 antenna test chamber is designed to provide the ideal environment for 5G antenna characterization throughout the entire process from R&D to production for both active and passive devices. This system supports far-field and near-field antenna measurements with its compact design. The mobile chamber helps to optimize the overall RF performance of antenna modules already in the initial phases of development.

  2. Phase Noise Analyzer And VCO Tester: R&S®FSWP
    4/16/2019

    Rohde & Schwarz’s R&S FSWP phase noise tester can measure the spectral purity of signal sources such as generators, synthesizers and voltage-controlled oscillators (VCO) more quickly than with any other solution. The high-end instrument covers a frequency range up to 50 GHz and offers a top dynamic range. It features an extremely low phase noise of its local oscillator coupled with cross-correlation that makes it possible to easily measure signal sources that in the past required complex test setups or could not be measured at all.

  3. Signal And Spectrum Analyzer For High-Speed Analysis In Lab And Production Applications: R&S®FSV300
    4/16/2019

    The R&S FSV3000 is designed to help users set up complex measurements in the simplest and fastest way possible. With its easy usability and high measurement speed, it is the right instrument for labs and production lines. It provides up to 200 MHz analysis bandwidth – enough to capture and analyze, for example, two 5G NR carriers at once.

  4. R&S®NRX Power Meter
    3/22/2019

    Rohde & Schwarz offers the R&S®NRX Power Meter base unit designed to simultaneously support up to four R&S sensors. The user interface with a touch screed based operating concept simplifies the operation, and results are displayed clearly on the flexible configurable screen. Function keys on the front panel provide quick access to the most important functions.

  5. Vector Network Analyzer: R&S®ZNA
    2/21/2019

    Rohde & Schwarz offers the new R&S®ZNA vector network analyzer with DUT-centric operating features that guide users quickly and conveniently to the desired measurement setup. With exceptional stability, low trace noise and excellent raw data capabilities, the analyzer is ideally suited for development and production applications that require high accuracy, such as developing and producing components and modules for A&D and satellite applications.

  6. R&S®Spectrum Rider FPH Handheld Spectrum Analyzer
    10/22/2018

    The R&S®Spectrum Rider FPH Handheld Spectrum Analyzer supporting a wide frequency range up to 31 GHz in both field and lab applications. This versatile, user-friendly instrument features a rugged, fanless design that features noise free operation that is clean and reliable since no dust or water can slip in through the vent guard.

  7. 3-In-One All-Rounder Vector Network Analyzer: R&S®ZNL
    10/26/2017

    Rohde & Schwarz offers the R&S®ZNL 3-in-1 all-rounder vector network analyzer (VNA) designed to offer vector network analysis, spectrum analysis, an power meter measurements all within one single, compact instrument. Offering frequency ranges from 5 kHz to 3 GHz or 6 GHz the R&S®ZNL is ideal for various RF component measurement applications in industrial electronics and wireless communications.

  8. High-Performance Spectrum Analyzer: R&S®FPL1000
    10/26/2017

    The R&S®FPL1000 is the latest addition to Rohde & Schwarz’ family of signal and spectrum analyzers. It is designed to cover the frequency range from 5 kHz to 3 GHz, and is an ideal instrument for use in the lab, and production and service applications. By combining the functionality of a benchtop instrument with the portability of a handheld instrument, this instrument offers high sensitivity and low phase performance so that even small interfering signals next to the carrier can be analyzed.

  9. Power Supply Series: R&S®NGE100
    5/15/2017

    Rohde & Schwarz now offers the R&S®NGE100 power supply series composed of the R&S®NGE102 two-channel power supply and the R&S®NGE103 three-channel power supply. They both provide up to 33.6 W of output power per channel. These instruments are designed to deliver high efficiency, low ripple, and a variety of comfort functions that are not found in this class of power supplies.

  10. Spectrum Analyzer: R&S®FPC1000
    5/15/2017

    The R&S®FPC1000 is the latest addition to Rohde & Schwarz’ family of signal and spectrum analyzers. It is designed to cover the frequency range from 5 kHz to 1 GHz in a single sweep, which is upgradable to 2 GHz or 3 GHz with a keycode. It has the best display in its class and can be controlled via smart wireless remote control software, making it ideal for spectrum analysis in education, production, service, or basic research applications.