RF Military Electronics Featured Datasheets
-
Datasheet: XR-1015QH: 10 To 16 GHz Highly Integrated, QFN Packaged Receiver
7/30/2008
Mimix Broadband’s 10.0-16.0 GHz QFN packaged receiver has a noise figure of 2.5 dB and 12.0 dB conversion gain. The device integrates an LNA, image reject mixer and LO buffer amplifier within a fully molded 4x4mm QFN package. The image reject mixer eliminates the need for a bandpass filter after the LNA to remove thermal noise at the image frequency. I and Q mixer outputs are provided and an external 90 degree hybrid is required to select the desired sideband. This device uses Mimix Broadband’s GaAs PHEMT device model technology, and is based upon electron beam lithography to ensure high repeatability and uniformity. This device is well suited for Point-to-Point Radio, LMDS, SATCOM and VSAT applications.
-
2920 - 10 MHz To 4 GHz Or 6 GHz RF Vector Signal Generator
7/18/2008
The Model 2920 RF Vector Signal Generator is a mid-performance test instrument designed for R&D and production testing of modern RF communications equipment and devices.
-
2820 - 400 MHz To 4 GHz Or 6 GHz RF Vector Signal Analyzer
7/18/2008
The Model 2820 RF Vector Signal Analyzer is a mid-performance test instrument designed for R&D and production testing of modern RF communications equipment and devices. This next-generation instrument combines state-of-the-art RF and digital signal processing (DSP) technology to measure RF test signals rapidly with high accuracy and excellent repeatability.
-
SignalMeister Waveform Creation Software
7/18/2008
The Keithley 290101 version 2.0 SignalMeister Waveform Creation Software is a next-generation development tool that allows engineers to quickly and flawlessly create both the basic and the highly complex signals required for today’s RF wireless testing needs.
-
14 To 16 GHz GaAs MMIC Power Amplifier - XP1058-BD
7/18/2008
Mimix Broadband’s four stage 14.0-16.0 GHz GaAs MMIC power amplifier has a small signal gain of 27.0 dB with +37.0 dBm saturated output power. This MMIC uses Mimix Broadband’s GaAs PHEMT device model technology, and is based upon optical lithography to ensure high repeatability and uniformity.
-
13.5 To 16.0 GHz GaAs MMIC Power Amplifier - XP1057-BD
7/18/2008
Mimix Broadband’s three stage 13.5-16.0 GHz GaAs MMIC power amplifier has a small signal gain of 17.0 dB with +48.0 dBm output third order intercept.
-
XG1001-SA: 0.05 To 4 GHz, Dual High Dynamic Range Amplifier
7/15/2008
The XG1001-SA is a dual high dynamic range amplifier designed for applications operation within the 0.05 to 4.0 GHz frequency range. Co-located matched amplifiers are assembled in an RoHS compliant SOIC-8 package.
-
Boonton Power Meters: 4540 Series Datasheet
7/1/2008
The Boonton model 4540 Series is the instrument of choice for capturing, displaying and analyzing RF power in both the time and statistical domains. Applications include pulsed RF signals such as radar, TDMA and GSM, pseudorandom or noise-like signals such as CDMA, WLAN and WiMAX.
-
Datasheet: Cooling Filters
4/23/2008
Introducing the most efficient, cost-effective cooling technology available for outdoor electronic enclosures: Cooling Filters from W. L. Gore & Associates
-
Data Sheet: IZI Probe® PCB
1/17/2008
The PCB IZI Probe® is an inexpensive alternative to costly test fixtures and it is especially suitable for production test. A revolutionary tip enables an extremely precise and safe contact with a planar-planar contact on PCBs, ICs and ceramic substrates up to 4 GHz. Custom probes can be supplied up to 20 GHz. Fully 50 Ohm impedance matched, the HF transmission is totally isolated by air, ensuring the lowest possible insertion loss...