Product Showcase

  1. 100 W Ka-Band TWT Amplifier With Rackmount Configuration: dB-4164
    9/4/2018

    dB-Control offers the dB-4164 traveling wave tube amplifier (TWTA) for power amplification of CW, AM, FM or pulse-modulated signals. Operating in the 26.5 to 40 GHz frequency range, this TWTA provides 100 Watts minimum output power, and proprietary low-noise, high-efficiency designs to operate the RF signal path.

  2. Mixed Signal Oscilloscope (MSO): 6 Series
    8/29/2018

    Tektronix offers the 6 Series Mixed Signal Oscilloscopes (MSO) designed for present and future troubleshooting and high-speed design validation applications within the 1 – 8 GHz frequency range. This series provides accurate measurements, low noise, and 25 GS/s sample rates per channel.

  3. GNSS Low-Noise Amplifier Front-End Modules With Integrated Pre-Filters And Post-Filters
    8/24/2018

    Skyworks offer two new front-end modules (FEMs) for GNSS/GPS/GLONASS/Galileo/Compass/QZSS radio receiver applications in the 1559 to 1606 MHz frequency range. The SKY65933-11 and the SKY65943-11 feature an integrated low noise amplifier (LNA), and a pre-filter and post-filter. Both devices use surface-mount technology (SMT) in the form of a 2.5 x 2.5 mm Multi-Chip Module (MCM) package, which allows for a highly manufacturable and low-cost solution.

  4. Skyworks CATV Amplifiers: ACA4788 And ACA2778
    8/20/2018

    Skyworks offers new models of CATV power amplifier modules designed for CATV applications with operating frequencies ranging from 50 to 1218 MHz.

  5. Power Sub-Miniature (PSM) Connectors For Space Applications
    8/20/2018

    HUBER+SUHNER’s Power Sub-Miniature (PSM) connector interface is designed to maximize performance on power handling while minimizing overall system weight and size. Especially developed for space flight, high altitude platforms, TVAC environments, this space qualified per MIL-PRF-39012 and ESCC 3402 interface is extremely cost effective, and power and weight sensitive for the most demanding aerospace applications.

  6. 10 – 50 MHz Radiation Tolerant TCXO: T1254 Series
    8/14/2018

    Greenray presents the T1254 series of radiation tolerant temperature compensated crystal oscillators (TCXOs) designed for applications in the 10.0 to 50.0 MHz frequency range. These highly rugged TCXOs deliver excellent performance in high shock and vibration environments.

  7. 16 – 20.5 GHz GaN Power Amplifier: APN279
    8/10/2018

    Northrop Grumman offers the APN279 GaN power amplifier designed for use in point-to-point and multipoint digital radios, and commercial satcom applications. This monolithic, two-stage power device is fully passivated to ensure rugged and reliable operation.

  8. 30 – 3000 MHz Mini Benchtop Programmable Attenuator Assembly: 50BA-034-127
    8/10/2018

    JFW’s 50BA-034-127 is a mini benchtop programmable attenuator assembly designed for mm-wave testing in the 30 – 3000 MHz frequency range. It is configured with one solid-state programmable attenuator, and it features an attenuation range of 0 to 127 dB in 1 dB increments and 50 Ohms nominal impedance.

  9. 2.5 – 4.0 GHz Multi-Chip Transmit/Receive Module: QPM2100
    8/7/2018

    Qorvo offers the QPM2100 GaAs multi-chip module (MCM) ideally designed for S-band electronic warfare, communications, and radar applications in the 2.5 – 40 GHz frequency range. This device comprises a transmit/receive (T/R) switch, a low loss transmit path, and received path consisting of a low-noise amplifier, a digital attenuator, and a driver amplifier.

  10. 0.6 to 6.0 GHz 4XSPST Shunt MIPI® Antenna Tuning Switch: SKY5™-9256-701LF
    8/7/2018

    Skyworks new SKY5™-9256-701LF is a 4X single-pole, single-throw (4XSPST) switch is designed for antenna tuning applications requiring ultra-low ON resistance and low OFF capacitance in the 0.6 to 6.0 GHz frequency range. The switching is controlled by an integrated Mobile Industry Processor Interface (MIPI) controller.