Product Showcase

  1. Dual-Channel Switch LNA Module: QPB9329
    5/8/2018

    Qorvo offers the new QPB9329 highly integrated front-end module with operation in the 3.8 – 5.0 GHz frequency range for TDD base station, wireless infrastructure, small cell BTS, and pre-5G/5G massive MIMO applications. This LNA module integrates a two-stage LNA and a high power switch in a dual-channel configuration.

  2. 60 MHz High Power Band 41 BAW Filter: QPQ1300
    5/8/2018

    Qorvo’s QPQ1300 is a high performance bulk acoustic wave (BAW) bandpass filter specifically designed for sub band 41 (60 MHz BW) applications. Features include low insertion loss, high rejection, high attenuation, and a compact, RoHS compliant 5.00 x 5.00 x 0.93 mm packaging.

  3. 75 – 110 GHz Bench Top Amplifier: Model STB-7531142515-1010-S1
    5/4/2018

    SAGE Millimeter offers the Model STB-7531142515-1010-S1 broadband benchtop driver amplifier operating over the 75 to 110 GHz frequency range for use in bench top power amplification, antenna range, and power boosting applications. The amplifier features a typical small signal gain of 25 dB, a nominal P1dB of +15 dBm and Psat of +18 dBm.

  4. 18 – 40 GHz Broadband Subharmonically Pumped Mixer: Model SFS-18340315-KFSFSF-N1-M
    5/4/2018

    The Model SFS-18340315-KFSFSF-N1-M from SAGE Millimeter is a broadband subharmonically pumped mixer operating in the 18 to 40 GHz frequency range for use in radar systems, communication systems, and test equipment. Utilizing a high performance GaAs MMIC with superior RF performance, this mixer provides a conversion loss of 15 dB.

  5. 71 – 86 GHz, E-Band Active X4 Frequency Multiplier: Model SFA-713863415-12SF-S1
    5/4/2018

    SAGE Millimeter offers the Model SFA-713863415-12SF-S1 active X4 frequency multiplier with output frequencies of 71 to 86 GHz for use in frequency extenders, source modules, and communication systems. Features include an input frequency of 17.75 to 21.50 GHz, a typical harmonic suppression of -20 dBc, and a nominal output power of +15 dBm.

  6. 30 – 42 GHz WR-28 Orthomode Transducer With Circular Waveguide Port: SAT-363-25028-C1
    5/4/2018

    The Model SAT-363-25028-C1 from SAGE Millimeter is a WR-28 orthomode transducer (OMT) operating in the 30 – 42 GHz frequency range for 5G, radar, communication, antenna range, and circular and linear waveform applications. This device is designed to separate a circular or elliptical polarized waveforms into two linear, orthogonal waveforms, or combine two linear polarized waveforms into one circular or elliptical polarized waveform or vice versa.

  7. High-Performance Surface Mount RF Inductors
    5/3/2018

    Gowanda Electronics introduces several series of High Performance RF Surface Mount Inductors with nearly 2x more improvement in SRF and current ratings as compared to traditional molded designs with equivalent inductance. These CC4H1008, CF4H1008, CC4H1210, CF4H1210, CC4H1812 and CF4H1812 series of inductors were developed to address the ever-increasing performance requirements from RF SMT inductor components.

  8. Ultra Series™ Crystal Oscillator: Si549
    5/3/2018

    The Si549 Ultra Series™ crystal oscillator from Silicon Laboratories offers an ultra-low jitter, low phase noise clock at any output frequency through advanced 4th generation DSPLL® technology. Featuring a phase jitter of only 95 femtoseconds, this oscillator is perfect for optical networking, 100G+ optical modules, coherent optics, broadband, data center, broadcast video, test and measurement, and FPGA/ASIC clocking applications.

  9. 24 to 42 GHz Ka Band Scalar Feed Horn Antenna: SAF-2434231535-358-X1
    5/3/2018

    SAGE Millimeter offers the SAF-2434231535-358-X1 Ka-band scalar feed horn antenna designed to operate in the 24 to 42 GHz frequency range for use in Gaussian optical antennas, Cassegrian antennas, rapid system setups, and engineering setups. The antenna features a 15 dB nominal gain, 25 degree half typical power beamwidth, and nominal side lobe levels of -25 dB or lower.

  10. Real-Time Handheld Spectrum Analyzer: SignalShark
    4/25/2018

    Narda Safety Test Solutions offers the SignalShark Real-Time Handheld Analyzer for the detection, analysis, classification, and location of RF signals between 8 kHz and 8 GHz. The instrument solves complex measurement and analysis tasks reliably and quickly, and with the same RF performance levels as desktop instruments.