Passive Components Products

  1. Bias TEEs

    ETL Systems presents a series of Bias TEEs for L-band (850-2150 MHz), broadband (500-2500 MHz), and wideband (1- 5000 MHz) frequencies. Options include 10 MHz pass or block, and high current versions for powering one or more modules up to 5A and 48V.

  2. Surface Mount Directional Couplers

    Dielectric Labs Inc. (DLI) introduces a series of surface mount directional couplers designed to offer a turnkey surface mount solution for high frequency incident and reflected power monitoring. These directional couplers span the C, X, and Ku band frequency spectrums, and are available with 10dB and 20dB coupling values, and a common footprint for maximum flexibility.

  3. Military-Spec GPS Splitters

    GPS Networking provides military grade passive, amplified and high isolation splitters for the most rigorous and challenging environments. These splitters are based on the Wilkinson splitter design, and come with one input and 2, 3, 4, or 8 output options. Frequency response covers the entire L-band, or GNSS, GPS L1, L2, L5, Galileo, and GLONASS band frequencies, with excellent gain flatness.

  4. Outdoor Ready Passive Splitters/Combiners

    ETL Systems offers a new series of outdoor ready, IP67 rated RF power splitters and RF power combiners designed to cover the Ku and wideband frequency ranges. With 2-way, 3-way, and 4-way capacity options, these passive splitters/passive combiners are available in models with 10 MHz and DC pass on all ports, or 10 MHz and DC pass on one port. All units are provided with 50 ohm N-Type or SMA connector types, and are ideal for outdoor applications involving telecom infrastructures, satellite systems, microwave links, and radar networks.

  5. Ku-Band & Wideband Passive Splitters/Combiners

    ETL Systems offers a series of Ku-band, passive splitters/combiners with an operational frequency range from 10 – 15 GHz.  Models are available in 2-way, 3-way, 4-way, and 8-way variations. These splitters/combiners are available with 50 Ω SMA RF connector options, and are housed in a rugged, compact enclosure.

    ETL also released a new series of wideband spitters/combiners covering the 2-18 GHz, 6-18, and 2-8 GHz range. Models are available in 2-way, 3-way, 4-way and 8-way capacities, and feature 50Ω impedance with SMA connector options.

  6. Wilkinson Power Dividers

    Dielectric Laboratories offers a series of high-frequency SMT Wilkinson power dividers covering the 2 to 18 GHz frequency range, in 1-way, 2-way, or 4-way models. The devices feature a solder surface mount package, excellent phase and amplitude balance, and a compact size.

  7. Passive components

    HUBER+SUHNER (H&S) offers a comprehensive range of high-quality RF components designed with stable characteristics for the varying needs of in-building or distributed antenna networks, railways, and other test and measurement applications. The adaptors, terminators, and attenuators are compatible with one another, and are very high quality due to H&S’s many years of experience in the development and production of radio frequency components.

  8. X-Band 10W Limiters

    The TGL2217 and TGL2217-SM are Qorvo’s new wideband GaAs VPIN limiters designed to protect sensitive receive channel components against high power incident signals. These limiters do not require DC bias, and are able to achieve low insertion loss in a small form factor, allowing for simple system integration with minimal impact on performance.

  9. L-Band Passive Equalizers

    ETL Systems offers a series of L-band positive slope equalizers in the 50 ohm or 75 ohm impedance range. These passive equalizers are available with DC block or pass between the two ports, and have slope options in 1 dB increments over the 1 to 10 dB range. All of these devices are available with 50 Ω or 75 Ω SMA, BNC and N-type connector options. They are ideal for telecom infrastructure, satellite systems, microwave links, test and instrumentation, military communications, and radar network applications.

  10. 3-Channel LOW PIM Attenuator

    Corry Micronics’ 3 channel, LOW PIM attenuator covers the 400 to 3000 MHz frequency range and has been specifically designed for major mobile access carriers who are attempting to measure or monitor passive intermodulation distortion/interference in communications systems.