Products and Services

  1. RG Cable Assemblies
    3/11/2011

    Standard RG types of cable assemblies are available in a variety of connector configurations to meet your specific applications. Common connectors include SMA, F, BNC, TNC, and N. MegaPhase uses only MIL-DTL-17 rated coaxial cable ranging in small diameters, such as RG178, to large diameters, such as RG214.

  2. Semi-Rigid Cables
    3/11/2011

    The Semi-Rigid series cables range from .034 - .250 in diameter. All of the Semi-Rigid Cable used are MIL-17C qualified, with tin plated copper outer conductor. The SR series cables are typically custom built assemblies and formed to your specifications. These assemblies are capable of frequencies up to 50 GHz with precision connectors.

  3. Low Loss/Light Weight Jumper Cables: ClearPath™ Series
    3/11/2011

    The Clearpath series low loss/light weight cables offer a low loss cable solution without the cost of an expensive high performance cable. These cables are ideal for automatic test equipment bays, jumpers, and switch boxes where the cable will not be ruggedly handled or subjected to extreme environments.

  4. Phase Defined Cable: GrooveTube® 5 Series
    3/11/2011

    This system cable is made with our industry-leading GrooveTube® technology and is used in any application where low loss and/or phase stability are critical. Uses include phased array radar, electronic warfare radar systems, antenna feed cable, EMC lab test cable and high reliability interconnects. Our rugged construction resists torque, pull and crush forces.

  5. Flexible Semi-Rigid Alternative Cables: JumpShot
    3/11/2011

    The GB Series cables are a flexible alternative to semi-rigid cables. They use the same connectors and assembly tooling used for .086 and .141 versions. These cables offer a solution to situations where compact interconnects are needed. By using the GB series cables you eliminate the cost of design and drawings which semi-rigid cables would require.

  6. VNA Test Port Extension Cables
    2/10/2011

    MegaPhase's industry-leading VNA port extension test cables have been optimized to reduce the time associated with test equipment calibrations where compensation for loss, mismatches, and feed-throughs are critical to the test outcome. These mechanically stable test cables can be used repeatedly, and can be bent with little effect on the insertion loss, phase, or VSWR.

  7. Optocouplers/Optoisolators
    7/20/2012

    These optocouplers/optoisolators provide optical isolation in gamma, neutron, and proton radiation environments with high current transfer ratio and low saturation Vce. They are surface mount and come in a hermetic 8-pin leadless chip. Each channel includes an electrically isolated and optically coupled LED and NPN silicon phototransistor.

  8. RF Cables
    10/21/2009

    For our customer's convenience, JFW offers a line of semi-rigid RF cable assemblies as well as a selection of DC cable assemblies with a variety of interface connectors...

  9. High Performance Interconnect Cable: NextPhase™ 9 Series
    4/7/2011

    The 9 series cable is a high performance interconnect cable for a wide range of applications including communications, radar, uplink/downlink, airborne and space. These assemblies feature a low loss triple shielded cable and give outstanding shielding effectiveness. They are available with various precision connectors which feature excellent VSWR.

  10. Low-Loss Cables For High Frequency Testing
    12/8/2008

    The Low-Loss High-Frequency flexible cables from A.H. Systems are the preferred choice over standard cable types. With improved power handling, low VSWR, and high frequency capabilities, the Low-Loss cables can be made to your specified length and delivered in two days.