FEM

  1. 5 GHz WLAN Front-End Module (FEM): SKY65525-11
    1/9/2013

    This 5 GHz WLAN Front-End Module (FEM) is highly integrated and ideal for WiFi enabled handsets, tablets, and mobile/portable systems, system-in-package (SIP) modules for embedded systems, and WLAN-enabled wireless video systems.

  2. 802.11ac Enabling Front-End-Modules
    3/1/2013

    IEEE 802.11ac enables faster content downloads than 802.11n solutions have in the past. Skyworks recently developed and released two from-end-modules (FEMs) that enable 802.11ac technology for WiFi enabled smartphones and tablets. These new FEMs allow consumers to experience incredibly fast download speeds across multiple platforms.

  3. 802.11ac Switch/LNA Front End Module: SKY85608-11
    2/24/2015

    This front end module (FEM) combines a SP2T switch and an LNA with a bypass mode in an 8-pin, 1.5 x 1.5mm DFN package. It’s ideal for applications involving WiFi-enabled headsets, tablets, and mobile systems, for SiP modules for embedded systems, and in 802.11n/ac smartphones and tablets.

  4. 860-930 MHz RF Front-End Modules For ISM Band Applications
    5/24/2016

    The SE2435L and the SKY65378-11 are Skyworks’ high-powered and low-powered RF front-end modules (FEMs) designed specifically for industrial, scientific, medical (ISM) band applications with operation in the 860-930 MHz frequency range. These devices feature fully matched 50 W TX and RX inputs and antenna outputs, and RF blocks that operate over a 2.0-4.8 V range for use in a wide range of battery powered applications.

  5. A Complete Solution: SKY85806-11 WLAN Front-end Module
    2/20/2015

    This wireless front-end-module features the functionality of a power amplifier, a power detector, a transmit/receive T/R) switch, and a diplexer with additional filtering and associated matching functionality. It’s been designed to provide a complete 2.4 GHz to 5 GHz WLAN RF solution in a QFN 28-pin, 4.0 x 3.0 x 0.8 mm package.

  6. Front-End Module For Bluetooth® Smart/Bluetooth®: SKY66111-11
    9/3/2015

    The SKY66111-11 is a highly integrated front-end module (FEM) from Skyworks operating in the 2.4 to 2.485 GHz frequency range. It features low power consumption of 10 mA at 10 dBm, Rx bypass and supply operation from 1.8 to 5 V, and comes in a 20-pin MCM 3.3 x 3.0 x 0.8 mm package.

  7. Enhance Download Data Rates: DRx Front-End-Modules
    4/1/2015

    Skyworks DRx front-end-modules have been designed to improve receiver sensitivity and data throughput in 3G/4G multimode cellular tablets and handsets, while also reducing Rx noise figure. The FEMs are comprised of low loss RF switches, as well as receive SAW filters and low noise amplifiers.

  8. FEMs, LNA, PAs, and Switches for Video Game Consoles
    4/1/2014

    If the last few generations of video consoles taught us anything, it’s that gamers have almost entirely embraced internet connectivity in their systems, and that wired controllers are a thing of the past. This page provides an overview of Skyworks’ front-end modules, low noise amplifiers, switches, and power detectors used in Sony, Microsoft, and Nintendo consoles. These components help facilitate online play and wireless controller connectivity.

  9. Front-End Solutions for LTE Platforms
    3/9/2015

    Skyworks offers a family of LTE devices comprised of power amplifier modules and front-end modules for a suite of scalable and reconfigurable front-end system solutions for a variety of emerging communications markets.

  10. LNA Front-End Module: SKY65709-81
    9/19/2013

    This low noise amplifier (LNA) front-end module includes a BDS/GPS/GNSS pre-filter and ideal for Galileo receiver applications, smartphones, and tablets. It features a small signal gain, a low noise figure, low current consumption, a single 1.8 to 3.6 V single DC supply, and input/output impedance internally matched to 50Ω.