The high performance compact and powerful Model RTSA7550 Real-Time Spectrum Analyzer is a full-featured spectrum analyzer designed to analyze signals in the lab, on the manufacturing floor or out in the field.
The VectorStar® ME7838A4 is a 4 port broadband Vector Network Analyzer (VNA) that provides on-wafer and signal integrity for higher performance levels. With features including the world’s widest differential broadband sweep from 70 kHz to 110/125 GHz, and the integration of the 3743A mmWave modules and Non Linear Transmission Line (NLTL) technology, this VMA is able to conduct highly stable and quick measurements for differential device characterization.
The MS46122B is a series of three PC-controlled Compact ShockLine Vector Network Analyzers with a frequency range from 1 MHz to 8/20/43.5 GHz. The series benefits from patented ShockLine VNA-on-chip technology, which simplifies the internal VNA architecture at high frequencies, reduces instrument cost, and enhances accuracy and measurement repeatability.
All the members of the MS46122B series are low cost full-reversing 2-port VNAs aimed at RF and microwave applications in manufacturing, engineering and education. All three MS46122B VNAs have 220 microseconds per point sweep speed and better than 100 dB dynamic range making them suitable for a variety of device test applications.
Signal Hound’s BB60A combines a real-time spectrum analyzer and an RF recorder in a 7.63” x 3.19” x 1.19” package. This page will focus on the spectral analysis function of the device.
The SiteHawk Analyzer is capable of fast swept measurements with seven user-selectable trace capture options. Two different units, the SK-4500-TC and SK-200-TC, are available for coverage over the 1-4500 MHz and 300 kHz-200 MHz frequency ranges, which can be set using either Start/Stop or Center/Span frequencies.
The NRA-2500 covers the 5 MHz to 2.5 GHz frequency range and is ideal for use as a starter model for satellite monitoring and control systems. It’s optimized for use in D-SNG vehicles, teleports, and in maritime applications.
Anritsu’s Site Master™ S820E is the highest performance, rugged, hand-held microwave cable/antenna analyzer covering 1 MHz to 40 GHz range. Utilizing the latest advancements in NLTL technology, the S820E architecture enables benchtop performance in a portable package.
The R&S FSW85 is the latest addition to Rohde & Schwarz’ family of signal and spectrum analyzers. It is the only device on the market designed to cover the frequency range from 2 Hz to 85 GHz in a single sweep, allowing users to test baseband and RF with a single analyzer. Test setups are now much simpler, since the R&S FSW85 does not require harmonic mixers. An internal preselection feature suppresses the image frequency and other spurious emissions that commonly occur during harmonic mixing.
Remote controlled Remote Analyzer with receiver characteristics having an unusually comprehensive range of features, making it exemplary value for money. It is especially suitable for radio monitoring. NRA-6000 RX provides comprehensive analysis of all radio frequency ranges including the latest mobile communications bands (from TETRA through to GSM, UMTS, WiMAX and LTE).
The DSA800 series of spectrum analyzers collectively covers the 9 kHz to 1.5, 3.2, or 7.5 GHz frequency range. These systems feature a widescreen display, a compact design, and a simplified interface. The analyzers employ a Rigol digital IF filter to allow for smaller bandwidth settings and a reduction in displayed noise levels.
|
|
|
|
|
|
|
|
|