5G Products
-
3.3 – 4.2 GHz 0.5 Watt Linear 5G Pre-Driver: QPA9822
6/10/2024
The QPA9822 is a wideband, high-gain, and high-linearity driver amplifier designed to handle wideband 5G NR instantaneous signal bandwidths, making it perfectly suited for m-MIMO applications.
-
40 GHz Coaxial Switches For 5G Applications
5/10/2023
These 2.92 mm switches come in SPDT, Multi-Position, Transfer (DPDT), and Terminated models, offering excellent RF performance in Return Loss (VSWR), Insertion Loss, and Isolation.
-
2.4 GHz Wi-Fi 6 bandBoost Integrated Front End Module: QPF7250
2/13/2023
The Qorvo QPF7250 is an integrated front end module (iFEM) designed for Wi-Fi 6 (802.11ax) systems which marries the advantages of active components with edgeBoost filter technology.
-
NetSync™ Low Phase Noise Jitter Attenuating Clock For 5G/eCPRI/SyncE/IEEE: Si5518B
9/14/2022
The Si5518B NetSync Network Synchronizer Clock combines the functions of a SyncE/IEEE 1588 PTP network synchronizer clock with a low phase noise 5G/eCPRI wireless jitter attenuator into a single IC device.
-
Wireless Jitter Attenuators
9/14/2022
The Skyworks family of wireless jitter attenuators offers CMOS integration, reduced power, low noise and size without compromising the stringent performance and reliability required in wireless applications.
-
NetSync™ Network Synchronizer Clocks
9/14/2022
NetSync network synchronizer clocks support Synchronous Ethernet (SyncE)-compliant wander filtering and software adjustment of output frequency and phase for IEEE 1588 applications.
-
SkyOne ET Front-End Module: SKY58211
4/18/2022
The SKY58211 Envelope Tracking Front-End Module (FEM) is a multimode multiband (MMMB) module with integrated Low Noise Amplifiers (LNAs), which supports 2.5G / 3G / 4G / 5G and CDMA handsets, and operates efficiently in WCDMA, HSPA, and LTE modes.
-
Sky5 Mid/High-Band Front-End Module: SKY58085-11
4/18/2022
The SKY58085-11 Mid- and High Band Front-End Module (FEM) supports 3G / 4G / 5G mobile devices and operates efficiently in 3G / 4G /5G modes. The module has separate 3G / 4G / 5G PA blocks operating in the mid- and high bands, a silicon controller containing the MIPI RFFE interface, RF band switches, MB and HB antenna switches, bi-directional couplers, and integrated filters for Bands 1, 2, 3, 7, 34, 39, 40, and 41.
-
Aerial Monitoring System: R&S AMS
2/14/2022
Whether you are monitoring airspace for 5G C-band interference or checking microwave links, the R&S AMS (aerial monitoring system) is a payload for drones that provides monitoring and analysis capabilities for VHF/UHF/SHF transmissions that are difficult to measure from the ground.
-
Smart Home Communications Controller: QPG6100
1/19/2022
The QPG6100 is a multi-standard Smart Home Communications Controller for ultra-low power wireless communication for Connected lighting applications, switches and other Smart home end nodes, featuring Qorvo’s ConcurrentConnect™ technology; enabling Zigbee, Thread and Bluetooth® Low Energy to operate simultaneously in a single chip design.