XG1001-SA: 0.05 To 4 GHz, Dual High Dynamic Range Amplifier

The XG1001-SA is a dual high dynamic range amplifier designed for applications operation within the 0.05 to 4.0 GHz frequency range. Co-located matched amplifiers are assembled in an RoHS compliant SOIC-8 package. The XG1001-SA is an ideal solution for implementing balanced or push-pull designs. The amplifier can also be used for dual-band operation where single-ended design is used for each band. The amplifier has the flexibility of being optimized for a number of wireless applications. The combination of low noise figure and high IP3 at the same bias point make it an ideal transmit or receive solution when used in applications including CATV operating from 50 to 850 MHz, cellular and PCS (personal communications service) operating from 0.8 to 2.2 GHz; MMDS (multichannel multipoint distribution systems) operating from 2.2 to 2.7 GHz; and WLAN (wireless LAN) operation at 2.4 GHz. All devices are 100% RF and DC tested.

Features

• Matched Pair of Amplifiers for Optimum Balanced Design
• 0.05 to 4.0 GHz Frequency Range
• 44 dBm Output IP3 (Balanced configuration
)
• 41 dBm Output IP3 (Single-ended configuration)
• 13 dB Gain @ 2 GHz
• 22.5 dBm P1dBm
• 2.1 dB Noise Figure
• RoHS Compliant SOIC-8 Package
• Single Positive Supply
• 3V to 5V Voltage Rail