Newsletter | September 12, 2023

09.12.23 -- What To Ask When Selecting Antennas For EMC Testing


What To Ask When Selecting Antennas For EMC Testing

Choosing the right antennas for EMC testing is crucial. Different antennas have different radiation patterns, frequency ranges, and polarization characteristics. Selecting antennas that accurately represent the intended operational environment of the DUT is essential for accurate testing results.


How To Use Antenna Factors

Antenna factor (AF) is a comparison between the field level presented to the antenna and the actual voltage produced by the antenna at its connector. AF varies with frequency, that is, for the same presented field strength. But at a different frequency, the voltage produced at the connector is not constant.


Leonardo Deploys Digital Twin To Monitor Helicopter Radar In-Flight Behavior

Discover how Leonardo utilized Altair's digital twin solution to optimize helicopter radar performance, correlating deformation, tracking changes, and calculating electromagnetic signatures.

Basic Fundamentals And Applications Of Radar

This white paper introduces radar's evolution, highlighting its growth into a highly computerized technology with complex components and its various applications.

Antenna Far Field Distances

Antenna specifications, especially antenna gain, can be confusing and are often misunderstood, particularly when applied in the "far-field" region.


How To Save Time And Money Sourcing Switches For RF Applications

Being able to procure both EM switches and PIN diode switches from a single U.S.-manufactured source provides increased flexibility and access to expertise for customers.

Battery Simulation With DC Power Supplies

This application note helps users create custom battery models for R&S NGM200 and R&S NGU201 power supplies for gradual battery discharge, data logging, and battery simulation with a developer tool.

What Are EMI Filters?

An EMI filter is used to mitigate undesirable electromagnetic emissions or disturbances that can disrupt electronic systems, ensuring electromagnetic compatibility in the same environment.


Rohde & Schwarz, Greenerwave To Verify RIS Modules And Drive 6G Research

Saelig Introduces Select Fabricators Series 700 EMI Enclosures

Chuhang Technology Showcases Industry-Leading Radar Innovations At IAA 2023

Keysight Accelerates Open RAN By Co-Organizing First Global OTIC Summit

Lockheed Martin Delivers Initial 5G Testbed To U.S. Marine Corps

Verus Research Lands $15.6M Naval Research Laboratory Contract

TTM Technologies Awarded Contract From The U.S. Army For AN/UPR-4(V) PDRS

Abracon's Latest Acquisition Announces Modernized Brand Revitalization

Ericsson Supplies Network Technology For The BSI's 5G/6G Security Lab

Richardson RFPD Announces Availability Of Snap-On Connectors From HUBER+SUHNER

HaiLa Technologies Recognized For Its Sustainable Technology


Tune A Tunable Matched Antenna Using XFdtd’s Schematic Editor

In this tutorial, we demonstrate the ease of adjusting, or tuning, multiple operating modes so that capacitance values match various frequency bands. Using XF’s schematic editor with tuning slider bars, the correct values can be found in moments.


Antenna Product Overview

The MVG product portfolio includes a wide variety of antennas optimized for specific applications, including range measurements, high-power, EMC testing, and telecommunications and navigation.


Sinewave Electronically Vibration Compensated OCXO

MtronPTI's XO5503 Series provides highly stable 100 MHz sinewave OCXOs with electronic vibration compensation, ideal for airborne satellite communications and shipboard radar, offering 0.02 ppb/g g-sensitivity.

Download Datasheet

• Request Information


Surface Mount Broadband Balun: BALE-0009SMG

The BALE-0009SMG is a surface-mount broadband balun, hand-tuned for optimal phase and amplitude balance over 10 MHz to 9 GHz bandwidth. 

Download Datasheet

• Request Information

Marki Microwave

Connect With RF Globalnet: