WCS/MMDS Air Cavity Diplexer
This diplexer uses TE Mode waveguide puck resonators to achieve narrowband filters of less than 0.25% bandwidth yet still provide a pass band loss on the order of < 1.5 dB. In addition to the low loss provided by the high Q ceramic resonators, cross coupling is used to achieve very deep rejection of 75 dBc at a 4:1 shape factor. This device also incorporates a sampling coupler and is available in both diplexer and double band pass configurations in frequency ranges of 2250 MHz to 2800 MHz...
Click Here To Download:
•Datasheet: WCS/MMDS Puck Cavity Diplexer
•Software: Dionysus Microwave Filter Design
•Capabilities Overview: ComNav Engineering, Inc.
This diplexer uses TE Mode waveguide puck resonators to achieve narrowband filters of less than 0.25% bandwidth yet still provide a pass band loss on the order of < 1.5 dB. In addition to the low loss provided by the high Q ceramic resonators, cross coupling is used to achieve very deep rejection of 75 dBc at a 4:1 shape factor. This device also incorporates a sampling coupler and is available in both diplexer and double band pass configurations in frequency ranges of 2250 MHz to 2800 MHz..