20 Watts CW 6 – 18 GHz Solid-State Amplifier: 20S6G18A

Source: AR

20 Watts CW 6 – 18 GHz Solid-State Amplifier: 20S6G18A

AR’s 20S6G18A is a solid-sate amplifier covering the 6 – 18 GHz frequency range. When used with a sweep generator, it provides a minimum of 20 watts RF power. Like most of AR’s amplifiers, this model is ideal for applications that call for instantaneous bandwidth and high gain.

Request Information

The 20S6G18A is equipped with a Digital Control Panel (DCP) which provides both local and remote control of the amplifier. The amplifier is designed to have low spurious signals, linearity and is extremely load tolerant which enables it to be used in many RF applications such as RF susceptibility testing, antenna/component testing, and communication technology testing.

Specifications include:

  • Rated Power Output: 20 watts minimum (6-18 GHz)
  • Power Output @ 3 dB Compression
    • Nominal: 25 watts
    • Minimum: 20 watts
  • Power Output @ 1 dB compression
    • Nominal: 22 watts
    • Minimum: 15 watts
  • Power Gain Flatness : ±2.0 dB typical, ±3.0 dB maximum
  • Power Gain: 43 dB minimum (at maximum setting)
  • Input Impedance: 50 ohms, VSWR 2.5:1 maximum
  • Output Impedance: 50 ohms, nominal

For additional information on the 20S6G18A solid-state amplifier’s features and specifications, download the datasheet.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information