Product/Service

UHF ASK/FSK Receiver (ATA3742P3-TGQY)

Source: Digi-Key Corporation
The ATA3742 is a multi-chip PLL receiver device supplied in an SO20 package. It has been specially developed for the demands of RF low-cost data transmission systems with data rates from 1 kBaud to 10 kBaud (1 kBaud to 3.2 kBaud for FSK) in Manchester or Bi-phase code. The receiver is well-suited to operate with Atmel®'s PLL RF transmitter IC U2741B. Its main applications in the area of wireless control are telemetering, security technology, tire-pressure monitoring and keyless-entry systems.

Click Here To Download:
Datasheet: UHF ASK/FSK Receiver (ATA3742P3-TGQY)

The ATA3742 is a multi-chip PLL receiver device supplied in an SO20 package. It has been specially developed for the demands of RF low-cost data transmission systems with data rates from 1 kBaud to 10 kBaud (1 kBaud to 3.2 kBaud for FSK) in Manchester or Bi-phase code. The receiver is well-suited to operate with Atmel®'s PLL RF transmitter IC U2741B. Its main applications in the area of wireless control are telemetering, security technology, tire-pressure monitoring and keyless-entry systems. It can be used in the frequency receiving range of f0 = 300 MHz to 450 MHz for ASK or FSK data transmission. All the statements made in this datasheet refer both to 433.92 MHz and 315 MHz applications.

Features

  • IC Distinguishes the Signal Strength of Several Transmitters via RSSI (Received Signal Strength Indicator) Output
  • Minimal External Circuitry Requirements, No RF Components on the PC Board Except Matching to the Receiver Antenna
  • High Sensitivity, Especially at Low Data Rates
  • Sensitivity Reduction Possible Even While Receiving
  • Fully Integrated VCO
  • Low Power Consumption Due to Configurable Self-polling With a Programmable Time Frame Check
  • Supply Voltage 4.5V to 5.5V
  • Operating Temperature Range –40°C to 105°C
  • Single-ended RF Input for Easy Adaptation to ? / 4 Antenna or Printed Antenna on PCB
  • Low-cost Solution Due to High Integration Level
  • ESD Protection According to MIL-STD. 883 (4 KV HBM)
  • High Image Frequency Suppression Due to 1 MHz IF in Conjunction With a SAW Front-end Filter (Up to 40 dB Achievable With Newer SAWs)
  • Communication to Microcontroller Possible via a Single, Bi-directional Data Line
  • Power Management (Polling) is also Possible by Means of a Separate Pin via the Microcontroller

Click Here To Download:
Datasheet: UHF ASK/FSK Receiver (ATA3742P3-TGQY)