0.1 – 18 GHz Solid-State Programmable Attenuator: 50P-2101


JFW’s Model 50P-2101 is a 50 OHM solid-state programmable attenuator with attenuation range 0 to 63.5 dB by 0.5 dB steps. The unit operates bi-directionally with the input rated for +24 dBm and the output rated for +15 dBm.

The 50P-2101 features individually controlled attenuation steps at 0.5 dB, 1 dB, 2 dB, 4 dB, 8 dB, 16 dB, and 32 dB. Each of the attenuation steps has a corresponding TTL control line. TTL high will turn on an attenuation step. TTL low will turn off an attenuation step. Use multiple control lines simultaneously to set combinational attenuation values. 

For additional features and specifications on the 50P-2101 attenuator, download the datasheet or drawing.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information