Product/Service

1200 Watt CW, 10 kHz - 225 MHz Solid-State Broadband Amplifier: 1200A225A

Source: AR
1200A225A

AR’s 1200A225A is a solid-sate amplifier covering the 10 kHz – 225 MHz frequency range. When used with a sweep generator, it provides a minimum of 1200 watts of RF power. Like most of AR’s amplifiers, this model is ideal for applications that call for instantaneous bandwidth and high gain.

A front panel digital display indicates operational status and fault conditions when over-temperature or power supply faults have occurred. The amplifier is protected from RF input overdrive by an RF input leveling circuit that controls the input level to the amplifier’s first stage when increased above 0 dBm. This amplifier has been designed for a benchtop, but it can be removed from its cabinet for equipment rack mounting.

1200A225A Specifications include:

  • Rated Power Output: 1200 watts minimum (10 kHz – 225 MHz)
  • Small Signal Gain Flatness : +2.0 dB typical, +2.5 dB maximum
  • Gain: 61.8 dB minimum
  • Input Impedance: 50 ohms, VSWR 1.5:1 maximum
  • Output Impedance: 50 ohms, nominal

For additional information on the 1200A225A solid-state amplifier’s features and specifications, download the datasheet.