1000 Watts CW 0.8 – 4.2 GHz Solid-State Amplifier: 1000S1G4

Source: AR

1000 Watts CW 0.8 – 4.2 GHz Solid-State Amplifier: 1000S1G4

AR’s 1000S1G4 is a solid-sate amplifier covering the 0.8 – 4.2 GHz frequency range. When used with a sweep generator, it provides a minimum of 1000 watts RF power. Like most of AR’s amplifiers, this model is ideal for applications that call for instantaneous bandwidth, high linearity, and high gain.

Request Information

An included Digital Control Panel (DCP) provides both local and remote control of the amplifier. The DCP uses a color LCD touch screen and a single rotary knob to offer status reporting and control capability.  The low level of spurious signals and linearity make it ideal for use as a driver amplifier in testing wireless and communication components and subsystems, communication technologies, and EMC test applications.

Specifications include:

  • Rated Power Output: 1000 watts minimum (0.8 – 4.2 GHz)
  • Power Output @ 3dB Compression:
    • Nominal: 1050 watts
    • Minimum: 950 watts
  • Power Output @ 1dB compression:
    • Nominal: 850 watts
    • Minimum: 800 watts
  • Small Signal Gain Flatness : +2.0 dB typical, +2.5 dB maximum
  • Gain: 60.5 dB minimum (at maximum setting)
  • Input Impedance: 50 ohms, VSWR 2.0:1 maximum
  • Output Impedance: 50 ohms, nominal

For additional information on the 1000S1G4 solid-state amplifier’s features and specifications, download the datasheet.

Need More Information? Just Ask.

Click the button below to directly contact the supplier. Use it to:

  • Ask a question.
  • Request more detailed information or literature.
  • Discuss your current project/application.
  • Request a quote.
  • Locate a distributor in your area.
  • Schedule a demo.
Request Information